Jump to content
SAU Community

Autosalon Melbourne 2008 Thread


Mohsen
 Share

Recommended Posts

well who went?

post up your pics!

i got some footage of the GTR's on the dyno.

a few pics, but lots of long vids including the subie blowing up :D

i also scored a photo with the tities... i mean pam rodriguez :merli:

ill post up pics and vids soon

Link to comment
Share on other sites

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

haven't been to autosalon in a while now. would also like to know whats happened and also some pics or videos.

last time i went i was bored shitless which was weird cause i love cars...maybe because i wanted a seat in the dyno arena but there was too much god damn people lolz

Link to comment
Share on other sites

Aside from the price increase, I was quite happy with the cars that were there this year. Maybe it's improved a little now it's only once per year. Saw a lot of people's cars who I knew, unfortunately most of the owners weren't there to have a chat to. Except Matt, hi again Matt! Most impressive car there in my eyes was the red Rodeo near the entrance, the attention to detail was amazing. Loved the custom dash.

Camera batteries were too low so no photos :merli:

Link to comment
Share on other sites

it was boring.

very little verity in the cars from when i first when it only took me 45min to see the lot.

my reqermendation all feature cars should attend all states, this would not only increass the amount of car but also make it better imo

Link to comment
Share on other sites

Went to MAS yesterday (Sat) to see what was new. Ran not Al there with his car with EAS and their usual green and red monsters. Not sure what they made on the dyno though. The number of cars were down for the year as a lot of the car clubs didn't' really show this year. I think I saw MelbS15, Agentz, TeamIgnite and a couple other smaller clubs but all the Indos, Evolve and a few others were no shows. Old cars like the PETIR Celica, Teken RX7, the hot red RX7 (who has been there for many years but I can't remember the name) were all there as were some other cars which had been rebirthed. There were a fair few new cars though which were turning heads. Buggered if I remember them coz I think I'm just getting too old for it. Even the models there this time round were only average. Didn't see any particularly hot models like you usually would in years gone by. Even walked round looking for Sandra to brighten up my day but she wasn't even there. What gives San? You said to drop past and you were a no show-er :wacko:

Speaking of NOSHOW. Donny wasn't even there with his S15 or Ferrari or anything. Word has it that the last time he came to MAS, he demand King of AutoSalon even before the show and when AutoSalon told him to GAGF and earn it, he hasn't been back since. Seems like money can't buy anything...

The Haltech R35 GTR was there and ran up 360awkw on the dyno. This is a stock car besides the Haltech ECU. Apparently the car made 320awkw straight out of the box and they've tuned it up to a touch over 400awkw before which goes to show that this car will have some real tuning potential. At 170k though, I'm gonna hold off for a cheaper toy.

The dyno comp really has become an institution with cars from around the country coming to participate and take honours.

The big 3 of the day were the CDUCTV Supra ran up just over 800rwkw from what I heard but the real show came from Gas Motorworks from NSW. Their MZ2JZE ran up an impressive 841rwkw which was down on what was expected but their black GAS2JZ was a total animal and crushed it's own national record of 891rwkw with back to back runs of 949rwkw and 943rwkw!! Massive congrats to them and their awesome dyno cars. Although the cars are street registered, they weren't trying to decieve anyone and admitted that these cars are purposefully built for setting dyno records.

Gone are the days of 604awkw being massive numbers. I feel proud that I was one of the people who helped bring AutoSalon dyno comps into the spotlight back in 03-05 when myself, SAU and the Fang Artists brought out the most powerful cars and attracted crowds that left for standing room only.

Pics will come when I CBFed.

Link to comment
Share on other sites

heres some pics

lol at the TOSSA hummer

there were some cars with SAU on em

i liked ferrahs R34. looked fkn mint

the R33 with the aqua theme

a purple R32 with SAU on the window as well as a black S2 stagea

the R35 was aweomse.. just awesome but gawwdd

its a huge thing. a massive lump of porsche raping, german upsetting awesomeness

post-54148-1223188119_thumb.jpg

post-54148-1223188285_thumb.jpg

post-54148-1223188420_thumb.jpg

post-54148-1223188648_thumb.jpg

post-54148-1223188857_thumb.jpg

post-54148-1223189081_thumb.jpg

Edited by GTR-boy
Link to comment
Share on other sites

i thought i saw 'OOSkylineOO' with his camera there? but was from a distance didnt know if it was you or not. (Saturday night)

the ice r33 use to have clear taillights? what happened to those?

Link to comment
Share on other sites

i was there with melbs15, so most of my shots are of them sorry. dunno how i missed photos on so many hot gtrs, spewin i didnt take at least one of the blue haltech one with gt-ns :)

MelbS15 shots

IMGP1823.jpg

IMGP1883.jpg

IMGP1818.jpg

IMGP1828.jpg

IMGP1830.jpg

IMGP1833.jpg

IMGP1838.jpg

IMGP1840.jpg

IMGP1868.jpg

IMGP1866.jpg

IMGP1884.jpg

IMGP1885.jpg

IMGP1886.jpg

IMGP1879.jpg

non melbs15 (well, not on the day :D)

IMGP1871.jpg

IMGP1877.jpg

IMGP1858.jpg

IMGP1878.jpg

swirls in the marble paint! :thumbsup:

IMGP1854.jpg

IMGP1860.jpg

IMGP1849.jpg

IMGP1845.jpg

IMGP1853.jpg

IMGP1841.jpg

IMGP1869.jpg

IMGP1847.jpg

Link to comment
Share on other sites

damn...those s15's got some offset...feel sorry for the blue 34 gtr and grey supra.... :thumbsup: ...guess each to their own opinion.

Edited by jakez88
Link to comment
Share on other sites

I was there with Dragon Motorsport, as i met most the guys through EAS.

I found that MAS keeps getting smaller each year with less attractions to keep people entertained. Still enjoyed it, as i had time to look at some nice cars and sit back with a few Johnnies :).

Was VERY disappointed with the dyno, you would think that if a car was smoking the rears on the first past, they would at least have a 2nd look at the straps. All 3 runs produced heaps of smoke, from the rear wheels, but poor kw figures. Just can't understand how they can get the power down on a 800+rwkw car and totally fark up the strapping of a 300+rwkw; i guess if you're not a big "player" they just don't give a shit. Car left the dyno with two strips of rubber spread across the floor and stuck in the guards. Below is a pic of some of the rubber i dug out from the guards. A fair amount considering it only had 3 passes, the operator was a bit of a tool; if you could see/feel the car loosing traction on the dyno, why the fark would you continue the run?

post-1811-1223213873_thumb.jpg

What a busy week/weekend!

Had a chance to meet up with a few SAU crew.

Big congrates to Ferrah and Team Ignite; always knew it was going to be a close decision between our two clubs.

On a happier note, i "sold" my jumper leads for $150 :thumbsup:

A guy needed to borrow them, i was about to ask for his license, then he gave me $100 and said he'll collect the money when he returns the leads, a few hours later i remembered about the leads and the money in my pocket, and after counting the money i realized he had actually given me $150. He never came back with the leads :D

So tired need some rest

Link to comment
Share on other sites

PS: If anyone has a few decent pics of my car i would really appreciate the Hi-res copies. My camera went shitty and the battery died after 20 shots. Even the pic above is not even focused properly :thumbsup:

Link to comment
Share on other sites

that FAT200 S15 is my mates car and i agree he should have taken it for a professional polish before the autosalon but it was a last minute decision to enter..

i personally thought it was one of the better S15's on the day... here is another pic of the whole car

there was only a few cars there that turned heads.. and the models were pretty average

post-41800-1223215152_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • My 6 Point FIA harness have arrived (kinda). There was a mix up from the supplier and I ended up with 3" set rather than the 2" set. I contacted them and their customer service was top notch. It is being resolved and 2" ones will be on their way to be soon but in the mean time I was able to at least mock them up in the car to see the vibes. Need to organise some fixed back seats so i can actually use them as a 6 point. I am leaning towards the Velo Podium II XLs as I like the look of the bolstering compared to the GP90 XL or GPT2. The side and thigh bolstering on the GP90/GPT feels less that my existing Bride Digo R recliner. Velo Podium II XL Velo GP90 XL Velo GPT2 
    • Yea I know the wiring would be fine just want to use I got. This was my first built engine and it blowing got me beat down just want to have it running right again but hopefully I can find a non vct head so I don’t have to do any of this lol. 
    • Recently did the Perth Festival of Speed - and basically what we thought might be an average event turned out to be absolutely awesome they bought Mad Mike and Xtreme over and was good to see Perth get, support and produce something so good - 24,000 people in two days      It was nice to have it close to home for once yet have my whole crew there to run the car properly     Xtreme got the tin top laps record with 51.57    I hadnt done a hot lap on the home track for 20 months and finally everything clicked and dropped 4 secs off PB and did a 53.29 which is 3rd fastest tin top ever around that track. only 1.3 tenths behind 2nd so should eat that up soon... can I get Xtremes time - its not out of the question   Alll the blaa blaa's in the world but if I can replicate even close to that situation on other tracks will be able to make an impact     We got asked to do the hill climb to put on a show which in reality is just using some chicanes and the short track at barbs but good fun... launch control was put in and won the Pro class in that also.     Car needs some attention after being on it around Australia for last few months moreso the carbon underbody work and just a run through and clean up everything else seems to have held up good enough. Would like ,to take some weight out but that requires alot of effort 😁   Also waiting on new rules for WTAC and have some decisions to be made there and prob some minor modifications to suit pending class changes. Will see...   Divided on whether to go hard for one more year or chill out re: events this coming year prob more on the go hard and see if I can get improvements in times. If I didnt have so travel so far it would be less of an issue but I do so hmmm...   Also because build thread - gone to flappy paddles and a gearing change with a drop gear. It was becoming apparent that there were situations where I really needed to be hanging onto the wheel with both hands yet had to change gears and was getting a little sketchy and / or I just didnt change gears and delt with it and also 5th gear at 10,000 rpm is 290 kmph so I havent been using 6th as did 282 at WTAC and 274 in Perth drop gear will change to 6th being 300 at 10,000 rpm should also get a touch more acceleration speed    
    • No, not really. Except that there are newer, better cam options that don't date back to the 90s. I was under the impression that you couldn't use VCT with them, which is why I said to get rid of them. If you can't/won't use VCT because of what you listed above, that's another matter. Although I would have said the wiring aspect of it was something that you should just suck up and do, as it isn't hard. Getting an actuator for the cam gear will possibly be expensive. I still say VCT is for the win. There's a reason HKS makes money selling it for 26s.
    • Is there something wrong with using tomei?  I’ve heard the tomei usa are fake parts. Reason why I don’t want to make vct work is one gotta make a plug for the solenoid get the vct cam gear. I rather just use the stuff I already have. I made 450 on 17psi full boost at 4K. I’m satisfied with that it’s a street car and sometimes hit the track for drift. If I’m really wanting to decrease the lag I’ll go to a smaller rear housing as I have an extra or even cam gears. 
×
×
  • Create New...