Jump to content
SAU Community

350gt Power Problems.. Maybe

Touge Kyousou
 Share

Recommended Posts

Touge Kyousou Experienced

Touge Kyousou

Posted
Posted

Heya all,

Been lurking around here for awhile.. but have come across something funny with my car. Thought i'd chuck it here and see if anyone has any ideas/suggestions etc :thumbsup:

Anyways, the car's a 03 350gt 6mt with 47thou on the clock. I got the car serviced yesterday and decided to dyno it for the heck of it but it returned a rather low figure of 131 kw at the rears. Odd i thought as most are saying stock should put out around 160 at the rears.

I bought the car 2 months ago with 43 thou on the clock and since then it's had brake, engine, clutch, gearbox and diff fluid changed. The oil filter has been replaced. The car when bought, had a kakimoto regu 06 & R y pipe back exhaust installed shortly followed by a trust panel filter then a z-tube.

The car doesn't feel sluggish and in fact, feels quite fast. G-tech gives it a 5.89 time to a 60mp/h dash but 131rwkw seems a bit low for this kind of time. My previous ride was a mazda 3 mps with 180kw atw and that car only managed to post a flat 6 to the 60mp/h dash.

My next step is changing the spark plugs but i doubt that will help.. i think they come with platinum from factory that are good for upto 100 thou km's ?

Any ideas/suggestions etc is welcome!

Thanks for reading.

P.s. If anyone is around the st.george (sydney) area with a 350gt m/t and doesn't mind showing me what kind of power i should be feeling in my car (e.g. torque going up a hill/in gear acceleration), please feel free to PM me. If you'd like, you can drive my car and see if it's lacking a certain something as well.

Link to comment
https://www.sau.com.au/forums/topic/238998-350gt-power-problems-maybe/
Share on other sites
rs73 Grand Master

rs73

Posted
Posted

despite the low reading but if you can still get 5.86s 0-100 then I'd say the dyno may be configured to read low. Perhaps wrong setting from previous dyno run? that can throw the figure out of whack as well. many other factor can make dyno reading varies from one dyno to another

GEXer Enthusiast

GEXer

Posted
Posted
P.s. If anyone is around the st.george (sydney) area with a 350gt m/t and doesn't mind showing me what kind of power i should be feeling in my car (e.g. torque going up a hill/in gear acceleration), please feel free to PM me. If you'd like, you can drive my car and see if it's lacking a certain something as well.

Hey mate, u dont happen to live in South Hurstville do u? west st? if so, i live just around the corner of u, u can take mine for a spin see if there's any diff to your. :)

Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted

Hey all,

Thanks for the replies :)

Yeah i was thinking there maybe was a wrong setting on the dyno.. going through the dyno sheet doesn't tell me much though, other than the usual tire pres setting, correct intake and ambient temp plus the shootout mode was correct at 6 cyl n/a. I hope it was a wrong setting. I know this dyno reads fairly well usually as i've had my previous two cars on there in various states of tune/mods and the numbers it manages to post up seems quite realistic/normal. In saying that, my previous cars were dyno'd by the main mech/owner but few days ago, it was the senior apprentice that ran the 350gt.

BLISTC,

Wow, congrats on your awesome result! Thanks for the offer, really appreciate it but i'll take up GEXer's offer as he's quite close to me.

GEXer,

PM incoming, thanks mate :D

Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted
nothing - completely stock

ill try get the dyno graph posted

was done at a dyno day this yr @ unigroup engineering in girraween

Oh, ok...

I would of thought that was a bit high, but I may be wrong.

Not by much though!

Touge Kyousou Experienced

Touge Kyousou

Posted
  • Author
Posted

Just an update if anyone is curious..

GEXer took my car for a spin and noted that 1st gear felt better than his but my 2nd gear was weaker. GEXer's v35 however, has a different diff in it i believe so it was kinda inconclusive.

Been driving it around lately giving it a bit, certainly feels more than 131kw atw, so i don't really care.. long as the car is running healthy which it seems to be. AFR check was ok.

One thing my mate spotted (he was there during the dyno run) was that it was a raining day and my car went on with wet tires, plus the person driving my car on the dyno thought it was wheelspinning (the speed did climb a bit quick.. i've thrown my cars on the dyno plenty times) so most likely that explains the low power readout.

Case closed, am happy. Under 6 sec to 60mp/h timing is repeatable too without being super brutal so i think the car is going ok.

P.s. Thanks GEXer! Really appreciate it. Btw, saw your V35 today, very nice looking!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...