Jump to content
SAU Community

Recommended Posts

ive been hearing all sorts of different mumbo as to how much these boxes can handle. Im aware thats its more the torque that destroys them then power. What power are people running/had running before their's let go? 2wd/4wd/application?

Link to comment
https://www.sau.com.au/forums/topic/239013-what-sort-of-power-and-torque/
Share on other sites

4wd does put alot more stress through the gearbox, but people tend to break 3rd gear, and for most cars traction at 3rd gear speeds isnt usually a problem.

Ive got a feelling that there was an actual design problem with the allignment of 3rd gear, selector and gear dont match up 100% or something similar...dont qoute me.

So smashing the box through the gears tend to kill it. Try and avoid very hard and fast changes into 3rd gear, both from 4th and from 2nd, and there is a fair chance she'll hold together.

If it does break id be looking at aa PPG or OS Giken gear set, they dont cost the world and from what ive read are pretty tough stuff

[GT51R] was driving around with a 500+awhp r33 gtr with a t51r turbo and it lasted the punishment, and thats with a huge turbo coming on hard n fast.

Plenty of other boys as mentioned with big hp on stock boxes, i wont be overly worried but i would always have a couple of grand aside just incase it did let go

1.47 60 FOOT 10.4 AT 132MPH ON A COMPLETELY STOCK RB30 BOTTOM END SORRY BUT THATS RIGTH I CANT DRIVE

LOL! Stop driving like a psychopath on the street and they wont break as quick. You're an animal!! :sweat:

:P:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...