Jump to content
SAU Community

Recommended Posts

Hi guys, i'm a newbie here.

i got 32gtr and have a little thing concern.

when i am revving it in the neutral position: the rpm sort of drop a little and then goes up normally. after engine reaches normal operating temperature it still does the same, but just drop less.

what is the likely culprit for this problem? Any input much appreciated :thumbsup:

cheers.

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/
Share on other sites

02 sensors, clean afm, change spark plugs to platnium or iridiums,change oil, depending what rpm you idle at you might have to raise it alittle..... i had same prob in rb25det, eventually it will conk out or nearly conk out.....

i did all of this and the prob went away, but for me i did the 02 sensor last and that completed the solution..... hope this helps, im pretty sure it will

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4182153
Share on other sites

its on the dump pipes that come of the turbo's, you have a gtrso you have 2 dumps with 2 02 sensors

anyway you should change these for better fuel economy, mine was $70 and in a month i have saved about $50 in fuel, i filled up today with $51 where as i'd usually fill up with $70-75 for the same distance...... and the fuel prices have been fairly constant at $1.50-$1.60 for 98 octane fuel.... because there a bitch to take off i just changed the whole dump pipe for a larger one instead of trying to unbolt the old rusty one.

and if you want the idle probs to go away this will help to get rid of it,,,, as i said before, it did the trick in my car, similar engine

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4182713
Share on other sites

interesting....

i also have this problem, my car idles at about 1300rpm but after reving it the revs drop slightly then go back up. I thought it might have been the AAC vavle???

i just had 1 O2 sensor replaced as my exhaust wheel smashed it to pieces lol, shouldve got my mechanic to replace the other 1.

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4189484
Share on other sites

thanks for the input guys. will try to look into it.

btw does a 32gtr have more O2 sensor after the cat converter?

funny thing again is now, when i rev, instead of slightly dropping it slightly jumps up... then goes up as normal.

as for the idle, it actually idle very well. very stable.

problem is only when i rev it ... :ermm:

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4190301
Share on other sites

actually i did accelerate really slowly. so slowly indeed .. and i paid attention at the needle very closely :D

and it doesn't go down anymore .. not even a slight bit .. instead .. it jumps up .. with the same distance as when it used to drop down (around 50 rpm).

Ok it's the detail :) .......

(1) previous cold idle: 1,200 rpm.

(2) starting around two weeks ago, rpm drops when i rev (by 100 rpm from 1,200 to 1,100) then goes up as normal.

(3) 6 Oct: i initially just thought it could be clogged injectors :) . so i just add fuel injector cleaner liquid into fuel tank, the whole bottle into a full fuel tank. that's all i could do as the first step since i was worried :blink:

(4) have used up the almost fuel tank until this Sunday.

(5) 12 Oct: rpm didn't drop when i rev (i guarantee not even a bit..), instead it jumps up (by 100 rpm as well).

the difference also ... idle when cold became 1,100 (whereas previously cold idle was 1,200)

(6) so, revving when cold:

before: 1,200 -> 1,100

now : 1,100 -> 1,200

seems like there is a gap there between 1,100 and 1,200 that rpm just skips.

what do you think :ermm: ?

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4192540
Share on other sites

clean throttle body, change sparks, clean afm, check that there are no leaks in the engine pipes and 02 sensors..... has to be these..... its just general maintenance issues....

same solution for gtst

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4193111
Share on other sites

clean throttle body, change sparks, clean afm, check that there are no leaks in the engine pipes and 02 sensors..... has to be these..... its just general maintenance issues....

same solution for gtst

kujotk ... thanks hips for the answers :P . i will try to get all those done... thanks again :banana:

Link to comment
https://www.sau.com.au/forums/topic/239256-rpm-drops/#findComment-4197697
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...