Jump to content
SAU Community

Guilt-toy Now Running On E85 !


Recommended Posts

Mine is not a daily and i tend to drive hard 90% of the time so i doubt the O2 has much input. Its only had 1 tune on E85 so i'm not concerned (still uses less fuel than my patrol )

I don't see how you can have such little variation in fuel use considering how much extra fuel is needed with ethanol.

Edited by Bond
Link to comment
Share on other sites

because mine is a daily/streeter. so it sees a lot of time at cruise.

and it doesn't seem to need all that much extra to give me a lambda of 1 on e-flex

but yes I haven't done a full tank driving it hard 90% of the time. Will find out when i finaly get it onto the track :verymad:

Edit : Also consider 11l/100Km > 14l/100Km as a percentage. My consumption went up 27% Which is crack on ball park for ethanol

Link to comment
Share on other sites

techedge will set me back $478 or some shit after GST and freight tho :P

then I gotta get it installed....fark knows where I'll get that done, unless I can somehow just replace my factory o2 sensor with the techedge and plug that into the v44.

i can install it if you want.

Pat, it can do wideband closed loop or use the stock narrow band one.

Link to comment
Share on other sites

http://cgi.ebay.com.au/10-COLOUR-LED-WIDEB...=item2eb09e11bf

this is the one I've got.

Looks cheap and nasty, but responds fast, is accurate compared to Ed's dyno one. and cheep cheep!

does it have a 0-5v output for the ECU?

http://wbo2.com/2j/default.htm

this one is 411 + delivery if you get the 2j9 + 7200 sensor + LA1 52mm display

thats the updated version of mine and outputs to the ECU flawlessly.

Link to comment
Share on other sites

Oh you don't have closed loop going at the moment?

i though you had a wideband on your dash? no analog output?

i do have wideband closed loop going, i mean for trozzle. thats what the ECU needs to know to use it.

Link to comment
Share on other sites

does it have a 0-5v output for the ECU?

http://wbo2.com/2j/default.htm

this one is 411 + delivery if you get the 2j9 + 7200 sensor + LA1 52mm display

thats the updated version of mine and outputs to the ECU flawlessly.

Yeah man that's exactly what I wanted to get....BUT, it's $411 PLUS GST PLUS DELIVERY. They don't count GST in their original prices :) from memory, it came to like $478

Could you please define to me exactly what "closed loop" means in this sense? I keep getting the impression you tell it you want 12:1 AFR, and it will adjust fuel constantly to keep it there....if that's the case, you'd only need to adjust timing when swapping to E85...correct? that doesn't sounds quite right to me, hence my confusion...but it could be the case lol

Link to comment
Share on other sites

Closed loop only gets used during idle and cruise, where the ecu looks at the narrowband voltage, which only fluctuates from 0-1v and can only measure between 14-15 AFR... so the ecu keeps the voltage in between 0 and 1 volt by adding and taking out fuel. thus keeping the AFR's at i nice 14.7/1

This is my understanding of it anyway...

Link to comment
Share on other sites

narrow band closed loop aims for 0.5v which is 14.7:1 and is only used during light load/cruise, you can not use it to accurately aim for other ratios much beyond that, wideband closed loop aims for what ever afr you tell it to and can work even when you are using 100% throttle @ 7000rpm if you want.

if you want i can give you the map from my ECU Pat and you can take a look.

Link to comment
Share on other sites

wideband closed loop would be awesome! is that what your gonna be running? I'm very much limited to what NIStune can do.

I'll be getting the software tomorrow when I'm "hard at work" and have my laptop there hehehe

so i'll grab it off ya then. cheers!

Link to comment
Share on other sites

wideband closed loop would be awesome! is that what your gonna be running? I'm very much limited to what NIStune can do.

I'll be getting the software tomorrow when I'm "hard at work" and have my laptop there hehehe

so i'll grab it off ya then. cheers!

i have been running it for the past 2 years, you can get some excelent cruise econ running 15.5-16:1 with very low throttle

i just emailed the file to you as i dont have them at work.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...