Jump to content
SAU Community

Recommended Posts

Just a quick question, apolagies in advanced if this has been asked before

just need to know will a standard RB20 cooler mate up to a RB25 turbo

clearing defect so i have to put standard cooler on but i have an RB25 turbo fitted

any help would be much apprieciated thanks guys

Link to comment
https://www.sau.com.au/forums/topic/239359-r32-gtst-question/
Share on other sites

Just a quick question, apolagies in advanced if this has been asked before

just need to know will a standard RB20 cooler mate up to a RB25 turbo

clearing defect so i have to put standard cooler on but i have an RB25 turbo fitted

any help would be much apprieciated thanks guys

it'll fit and run.. but you won't get very effective cooling / air flow.

thanx mate, the hybrid cooler will be going straight back on as soon as the defect is cleared

Would be easier to buy an air box and change that, that is assuming you have been done for having the 2 intake mod thing, i believe fmic's are legal in all states other wise.

Would be easier to buy an air box and change that, that is assuming you have been done for having the 2 intake mod thing, i believe fmic's are legal in all states other wise.

nah mate you need them engineered here in nsw, on the defect slip is said exhaust to comply with ADR standards, there was a bit of confusion as the weather the FMIC would come under this but to cover their ass they said i either need to change it back to standard or head to the epa for emissions testing so they can clear the defect

easier to put the standard one back on to clear the defect

Edited by dreamd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just cut the bottom of the guard out. It's no longer got a big duct, to a sealed box, or a restriction. It has all the cold air from outside. Also, that cai you showed looks terrible. Bends are NOT good for go gos!
    • Like I said, "black magic" LOL In the end,  it is what it is, and hopefully, what this here knuckle head has done is an improvement and not a hindrance Not that I actually notice any negatives now, or that I will get any seat of the pants benefits when all is said and done, but best practice says I shouldn't be pulling intake air from the hot engine bay  Famous last words: I cannot see it being any worse than what it is at the moment 馃
    • If the gases flowing in those two tracts had the same properties, you could maybe use such broscience. But the exhaust has a different composition, different normal density, different actual density (because of different normal density, and mostly because of the massively higher temperature), and different viscosity (again because of much higher temperature). Consequently, all of the fluid dynamics parameters that matter, that you calculate from these inputs, such as the Reynolds number, friction factors (for wall friction) and so on, are all incomparable.
    • And we shall have to presume that Canada is the same?
    • In the US almost everything is E10. It can't exceed 10% by much or fuel systems have trouble adapting. At the same time because MTBE, MMT, and TEL are all banned they need as much ethanol in it as possible to boost octane.
  • Create New...