Jump to content
SAU Community

Recommended Posts

OK so the motor went pop in my series 1 so i may aswell start stripping it for the conversion now. Some parts will come of the autech, so they will be a few weeks away.

I basically have a complete car for sale.

All parts in good condition, will get pics up over the next week or so, if your after something particular PM me. All parts ono. Will post interstate at buyers expense.

Headlights $250 pair

Tail Lights (one has small crack) $200pair

Front guards $70each

Bonnet $100

Front seats $150 pair

Rear seats $100

FMIC kit $300

3 inch cat back exhaust $150

3 inch dump with cat $100

RB25 turbo $300

Pod $20

radiator $100

Rear Hatch $200

Mirrors $50 each

All doors $100 each

Steering wheel (series 1) $300

Passenger airbag $250

Front indicators $20 each

Seat belts $50 each

Front half shafts $100 each

Rear Half shafts $100 each

All rear suspension arms $40 each

Master cylinder $80

ABS module $100

Door trims $40 each (rears have holes from tweeters)

Various interior trims $??

3 Auto Gauges in DIN panel (water temp/oil temp/oil pressure all electric come with fitting to rad hose and sandwhich plate) $100

Aircon control panel $150

LSD $200

Rear hubs/brakes/handbrake cables (can use for 5 stud on s13's?) $200

Aircon condensor $100

Heater core $100

Complete RB25 with loom/ecu (needs to be rebuilt) $900

Auto trans and transfer case (car has done 183k's) $300

All glass $??

rear bumper $100

roof rails $80

windscreen wiper arms $20 each

all i can think of right now, but like i said i basically have one complete car.

0419943997

im in Bunbury WA.

Link to comment
https://www.sau.com.au/forums/topic/239543-wrecking-complete-stagea-series-1/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

OK so the motor went pop in my series 1 so i may aswell start stripping it for the conversion now. Some parts will come of the autech, so they will be a few weeks away.

I basically have a complete car for sale.

All parts in good condition, will get pics up over the next week or so, if your after something particular PM me. All parts ono. Will post interstate at buyers expense.

Headlights $250 pair

Tail Lights (one has small crack) $200pair

Front guards $70each

Bonnet $100

Front seats $150 pair

Rear seats $100

FMIC kit $300

3 inch cat back exhaust $150

3 inch dump with cat $100

RB25 turbo $300

Pod $20

radiator $100

Rear Hatch $200

Mirrors $50 each

All doors $100 each

Steering wheel (series 1) $300

Passenger airbag $250

Front indicators $20 each

Seat belts $50 each

Front half shafts $100 each

Rear Half shafts $100 each

All rear suspension arms $40 each

Master cylinder $80

ABS module $100

Door trims $40 each (rears have holes from tweeters)

Various interior trims $??

3 Auto Gauges in DIN panel (water temp/oil temp/oil pressure all electric come with fitting to rad hose and sandwhich plate) $100

Aircon control panel $150

LSD $200

Rear hubs/brakes/handbrake cables (can use for 5 stud on s13's?) $200

Aircon condensor $100

Heater core $100

Complete RB25 with loom/ecu (needs to be rebuilt) $900

Auto trans and transfer case (car has done 183k's) $300

All glass $??

rear bumper $100

roof rails $80

windscreen wiper arms $20 each

all i can think of right now, but like i said i basically have one complete car.

0419943997

im in Bunbury WA.

hey champ im keen on front and rear cup holders if you have them in good order and could you give me a price with postage to 3199. also i wouldnt mind the front windscreen depending on how much postage would be to 3199. if its to expensive ill just grab the cup holders. cheers

Both cup holders are good. Will get a price on freight.

As for the windscreen, i think it would cost more then its worth. Dont know howd id pack it either??

OK took some quick pics today.

Can get some more specific one's if needed. Will be starting to strip the car from the 20th of oct as i have a months holiday from then.

Taillights:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02364.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02365.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02380.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02381.jpg

Headlights:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02378.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02379.jpg

Front end:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02368.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02369.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02370.jpg

Back bumper:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02367.jpg

Exhaust:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02366.jpg

Engine bay:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02371.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02372.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02373.jpg

Gauges:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02374.jpg

Interior:

http://i105.photobucket.com/albums/m238/Ms...80/DSC02375.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02376.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02377.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02382.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02383.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02384.jpg

http://i105.photobucket.com/albums/m238/Ms...80/DSC02385.jpg

Assuming that 3" dump pipe is aftermarket, what sort is it? Is it like a bellmouth?

Yeah its a bellmouth type.

Not sure on brand. Mild steel type.

are you parting with any panels? if so what colour and how much for the left rear door?

The doors will come of the autech so there pearl white. Will have all panels some blue some white.

Pm replied regarding exhaust.

For gauges and cup holders $170 delivered.

able to get me a pic of the dump? willing to post it?

Will try and get pic of the dump soon, back at work now.

Had alot of interest in the exhaust atm. Will let everyone know soon.

Interested in the guages if that falls through with loymclure, also the grey stereo/aircon/gauge surround. And also after all the lugage hooks in the boot too if you have them.

Cheers

Interested in the guages if that falls through with loymclure, also the grey stereo/aircon/gauge surround. And also after all the lugage hooks in the boot too if you have them.

Cheers

Gauges may be sold. Will let you know.

The grey surround is still available, and yes all the luggage hooks are there.

What is the diff? In the photos the midnight blue stagea has an RS-Four badge, I thought they were all open-spinners? Is it RC40 (4.3:1)? You can see on the build plate in the engine bay just after the engine code...

Well if the guages don't sell id be keen on them the surround and the hooks... will need a price though :P cheers mate

I'll let you know asap for the gauges.

I picked the autech up today but havnt had a chance to have a good look at it yet as im on night shift till friday.

So early next week i will be able to answer everyones questions and start getting some bits off it.

Gday Neil

I am interested in the drivers side wind deflector and the front castor rods if they are up for grabs

Nothing heard from my pm's that I sent

Thanks

richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...