Jump to content
SAU Community

Fs: 18x8.5 +30 Rays Gold Volk Racing Forged Ce28n+tyres

Skyalwaysblue
 Share

Recommended Posts

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
Posted (edited)

Item: Genuine 18X 8.5 +30 offset GOLD VOLK RACING CE28N FORGED RIMS + TYRES

PCD: 114.3X5 and 100x5 multi stud pattern. They are forged rims from RAY Volk racing series. Their weight is 17.3 lbs about 6.45kg per rim which is lightweight and super strong!

Detail of the tyres:

Tyres are BRIDGESTONE RE750 DOT approved, unfortunately one tyre sidewall got punctured a few weeks ago and I replaced by Yokohama A drive R1.

So that's 3 X 235/40/18 BRIDGETONE RE750 TYRES 85% thread left, 1X YOHOHAMA A DRIVE R1 95% thread left.

Condition:

Very clean except some light wear and tear in stud areas(caused by removing wheel nuts)which is very normal, center and valve stem caps are not included in this sale due to stolen by some boring low life idiots. Volk racing and CE28N and wheel spec and factory quality guarantee stickers still there, except one CE28N sticker came off due to heavy brake dust.

Price: $4500 ono

To Fit: (What car)It will suit EVO 6 to EVO 10 without rubbing,rollling and spacers. Also can be used for Nissan GTR 32,33,34 etc.

Location:Melbourne

Contact:CE28N rims and tyres combo can be inspected by appointment for Melbourne buyers. Please do some homework and research for the price of rims and tyres before making your offer.

Send your offer to me via PM

Comments:Selling due to loss of license for 6 months will get it back until 2009, I will be travelling overseas at end of this month.

R02.jpg

w1-1.jpg

w2-1.jpg

w3.jpg

YR1.jpg

099.jpg

087.jpg

b1.jpg

103.jpg

Pics didnt do the justice! :)

Edited by Skyalwaysblue
Link to comment
Share on other sites
Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Hi mate

I dont mind about your rude reply, however I hope you could show some respect to the forum members :(

Genuine buyer will contact me via PM so there is no need you tell me what to do.

Good or not buyer will justify that, if buyer after center caps and one missing sticker I can organize that thats not the problem. I can get new one from RAYS JAPAN.

Please keep the for sale thread clean! Thank you! :)

Link to comment
Share on other sites
Marko R1 Grand Master

Marko R1

Posted
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

Link to comment
Share on other sites
Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

It work perfectly on GTR if you have a JDM Hyper Rev tuning magazine you can check it out. will suit 245,255 width tyres as well. Pls do not reply if you are not interested.

Thank you!

Link to comment
Share on other sites
Marko R1 Grand Master

Marko R1

Posted
Posted

yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

Link to comment
Share on other sites
WARLORD Veteran

WARLORD

Posted
Posted
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

i second that.

Link to comment
Share on other sites
Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted (edited)
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :P

If you wanna discuss about offset issue pls start your own thread.If you are not intend to buy no spamming!Thank you!

Edited by Skyalwaysblue
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 180 wanabe
      Thinking of getting a Q50 300hp and just tuning it instead of getting the Q50 Red or 400R

      By 180 wanabe · Posted

      So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • joshuaho96
      Blow Off Valve Is Causing Car To Stall!

      By joshuaho96 · Posted

      Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • Leigh_Mack
      Hello, Newbie, anyone know my 32's history?

      By Leigh_Mack · Posted

      I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • GTSBoy
      Hello, Newbie, anyone know my 32's history?

      By GTSBoy · Posted

      I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Leigh_Mack
      Hello, Newbie, anyone know my 32's history?

      By Leigh_Mack · Posted

      Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...