1995 R33 Gts-t Alarm Wiring Guide

[tdan]

Hi all...

For all those out there who are looking for a wiring diagram to do some diy alarm installation, I think I may have found it. I was at work one night and I was searching for the same thing and I came across a suggestion made in a US forum.

This is what was said "It is pretty basic Nissans of that year us or jdm are all pretty similar just get a diagram for a sentra of similar year and compare,if all else fails a good dvm or test lamp should do the trick.Only problem ar going to be the door locks."

I have downloaded said diagram, but have not yet had a chance to check it out to match the colours of the wires. I will post it up here for anyone else who wants to check it out and see if it helps them.

Constant 12V+ - Green Ignition Switch Harness

Starter - Black/White Ignition Switch Harness

Ignition - Black/Red Ignition Switch Harness

Ignition 2 - Black/Green Ignition Switch Harness Cold Start Wire

Accessory - Red Ignition Switch Harness

Tach - Green (AC) Distributor or Blue/Orange Position 3 Center Console

Brake Switch - Red/Green Brake Switch

Trunk Release - Red/Black Dots (-) Trunk Light

Trunk Pin - Red (-) Trunk Light

Head Lamp - Red/Yellow L And Red/Blue R at Light Switch

Hood Pin n/a

Factory Disarm Steering C N/a

Door Trigger - Red/White (-) Above Driver's Kick Yellow Connector

Door Lock - Gray (-) Door Lock Module to right of Column

Door Unlock - Purple (-)

Horn Wire - Green/White (-) Steering Column

Windows Up - LF=Blue/Red, RF=Blue/Red

Windows Down - LF=Blue/Black, RF=Blue/Black

PLEASE NOTE: THIS IS NOT 100% CONFIRMED. ONLY USE THIS AS A GUIDE. I WILL NOT BE HELD RESPONSIBLE IF SOMETHING BLOWS UP IN YOUR CAR.

And if anyone can prove me wrong with this wiring layout, let me know and I won't use it.

Cheers and enjoy

Edited October 10, 2008 by tdan

[Chris Rogers]

its 90% WRONG! use that and its almost certain you WILL kill something. USDM and JDM are two VERY different things.