How To: Install Clear Indicators On Your 35

[Data Queue]

All,

I got photo happy when installing my genuine nissan Clear indicators. I hope this helps someone else out. It will take you less than 15 minutes, all I used was a screwdriver and a rag (to clean up gunk behind old indicators).

Parts:

Step 1 - Pop out old light (be careful not to scratch)

Step 2 - Once Light is out disconnect the bulb from the surround by turning 45 degrees

Both indicators side by side

Step 3 - Remove the old bulb - DO NOT TUG ON WIRES!. Use the plugs for leverage please and a screw driver like pictured if it is stubborn.

Step 4 - Clean up gunk that built up behind old indicator (only necessary if you are anal like me)

Step 5 - All Clean

Step 6 - Test

Hopefully it works.

Step 7 - Insert bulb into the indicator (will only go in one way). You will then need to lock the bulb into place by turning back 45 degrees.

Step 8 - Place indicator back in place

Step 9 - Firmly press in and your done on the first side.

Step 10 - Rinse and Repeat with other side. You will need to turn the wheel back the other way first or your wheel will get in the way.

All done. Make sure to test again, then go for a drive to further test.

Edited October 11, 2008 by Data Queue

[rs73]

Is the provided yellow bulb bright enough during daytime compared to OEM bulb?

[Data Queue]

Is the provided yellow bulb bright enough during daytime compared to OEM bulb?

Seems fine to me the whole indicator still lights up. Ill drop an extra pic in later to show you.

It is a Nissan bulb so should be sweet.

[QuMii]

Nice little DIY...looks so much cleaner now.

Thanks for sharing man.

[danny_tq]

hey dude, thanks for sharing, appreciate it!

btw which site did u order that through or did u go through nissan parts!?

[Data Queue]

hey dude, thanks for sharing, appreciate it!

btw which site did u order that through or did u go through nissan parts!?

Got mine off an EBAY seller in the states. $55 delivered.

They are more expensive now due to exchange rates. Beware of the real cheap non genuine items!

[danny_tq]

How cool was that? What a great idea to do that instructional thread...

Did you really use that large of a Screwdriver?

and

What wheels are they, are they standard?

Sorry, still learning, but looks good.. and thanks.

they are standard, though they are darker than mine for some reason.

I reckon they look too good to me to replace,so I've just kept them!

[Stephen Thorpe]

Got mine off an EBAY seller in the states. $55 delivered.

They are more expensive now due to exchange rates. Beware of the real cheap non genuine items!

How cool was that? What a great idea to do that instructional thread...

Did you really use that large of a Screwdriver?

and

What wheels are they, are they standard?

Sorry, still learning, but looks good.. and thanks.

[Data Queue]

That was the screwdriver i used.

They are the 18" factory rims. Mine are darker than most. It's just a coating as there is a chip on one (you can see in the pics).

Edited October 11, 2008 by Data Queue

[BLISTC]

if you take that part number to nissan they are $119 delivered

still cheaper from america 55+27 delivery i think it was works out to be $90-100

i end up getting from nissan just for peace of mind i can easily get a refund if they dont turn up

Edited October 11, 2008 by BLISTC

[G7]

if you take that part number to nissan they are $119 delivered

still cheaper from america 55+27 delivery i think it was works out to be $90-100

i end up getting from nissan just for peace of mind i can easily get a refund if they dont turn up

Mark- didnt you say you got a set for $50 somewhere?

[BLISTC]

Mark- didnt you say you got a set for $50 somewhere?

yeh they sent me the wrong ones

the guy at the dealership got it wrong

i re-orderd with the same part number as above on the box posted in this thread and it was $119

[danny_tq]

hey guys,

thinking of buying these:

http://cgi.ebay.com/ebaymotors/JDM-INFINIT...emZ120315047245

do they seem legit?

[Data Queue]

hey guys,

thinking of buying these:

http://cgi.ebay.com/ebaymotors/JDM-INFINIT...emZ120315047245

do they seem legit?

well the pic looks legit to me - for a sedan.

if they are legit and you get them for that price it's a steal.

I say pay with Paypal and if they aren't genuine as advertised then lodge a dispute.

[danny_tq]

Got mine off an EBAY seller in the states. $55 delivered.

They are more expensive now due to exchange rates. Beware of the real cheap non genuine items!

hey mate

was this the set you bought off ebay?

works out to be about $70 bux delivered,not bad I guess!

http://cgi.ebay.com/ebaymotors/Infiniti-G3...emZ370096973006

[Frank350GT]

Hi everybody.

I got my NON-Factory for coupe back to Mid this year for US$30 delevered.

I consider it is pretty cheap.

BTW there is any other post regarding clear coner in form.

Lots of people discuss about it for long long ago.

[Data Queue]

hey mate

was this the set you bought off ebay?

works out to be about $70 bux delivered,not bad I guess!

http://cgi.ebay.com/ebaymotors/Infiniti-G3...emZ370096973006

Yep that's the guy i bought mine off. I got mine a bit cheaper when the $AUD was a bit higher.

Considering ordering off Nissan costs a heap more than that even $70 is a good price. I got mine 7 days after paying.

[turbosuk]

just got my clear corners today put them on in less than 10min easy also got some tinted overlays for my head lights and tail lights not so easy look good till you get closer but still look ok

[Stephen Thorpe]

just got my clear corners today put them on in less than 10min easy also got some tinted overlays for my head lights and tail lights not so easy look good till you get closer but still look ok

Pictures of the tints?

[turbosuk]

ill take some tomorrow and will put them in this topic