Jump to content
SAU Community

Recommended Posts

Hey guys just wondering if anyone could help me with this one. ive got oil leaking through my intercooler which is also going through my intake manifold there doesnt seem to be any close to the turbo side ive got a high mount manifold FMIC Garrett turbo and external waste gate which this problem just happend after i installed the waste gate yesterday. does anyone know what this could be?? thanks

Link to comment
https://www.sau.com.au/forums/topic/239815-r34-intercooler-oil-leak/
Share on other sites

clean off as much as you can then go for a drive

if it comes back then you have an issue - it might have been a once off

if it keeps coming back its usually the turbo oil seal that gets shagged

clean off as much as you can then go for a drive

if it comes back then you have an issue - it might have been a once off

if it keeps coming back its usually the turbo oil seal that gets shagged

Hey thanks for that i cleaned it out and just did the same thing, thats really strange the turbo is two weeks old, but thats the only thing i got think of to. Thanks

Hey guys just wondering if anyone could help me with this one. ive got oil leaking through my intercooler which is also going through my intake manifold there doesnt seem to be any close to the turbo side ive got a high mount manifold FMIC Garrett turbo and external waste gate which this problem just happend after i installed the waste gate yesterday. does anyone know what this could be?? thanks

err holy shit man... if you have oil in your cooler, like a decent amount it means one of your turbo seals is about to go...

its weird that there is none "near the turbo side" there is only 3 places the oil can enter

1. from the rocker blow by hose into the intake manifold

2. from the other rocker blow by hose into the turbo intake elbow/pod

3. from your turbo seals all through your i/c piping/ if its the rear seal it will go into your exhaust and you'll blow black smoke

so yeah do a bigger inspection, clean it up and try to narrow down where the source is, but its unlikley that you will have such a large amount of blowby on a fairly new engine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got a quote to restore a set of Volk racing gtc wheels at a wheel restoration shop which involved repainting the centres fixing some small gutter rash and repolishing them and the quote was $2.5k I ended up getting them sandblasted and powdercoated for $240  
    • Nismo 300km/h speedo for R33 gtst in GTR cluster.
    • Has anybody had their wheels refurbished? I reckon it's likely bloody expensive. Even a sand blasting quote for my 17s was 200-300 per wheel! The E39 wheels are basic BMW M Sport (or M Tech at the time.) they have slight rash and some have signs of bad repair in the past on the lips. The main issue is that they've become really off coloured.  I think it will be too much as this is definitely (supposed to be) a budget resto. I've been looking at others for sale but they all have some minor damage and colour issues.  In the end I think I'll just need to sand blast them myself and do a respray.  
    • Trying to figure out which nismo cluster i have. All the ones i see on the internet, the speedo goes up to 320kph and the revs 11k, with the nismo logo being on the rev gauge only. But on my one, the speedo goes up to 300 and says nismo, while the revs only go upto 10k and no nismo logo Dunno how to embed pics into a post so ill attach pic of my cluster and generic google search for reference Is what i have genuine?
    • how does one remove the needles from the gauge cluster on a R34 GTT?
×
×
  • Create New...