Jump to content
SAU Community

Recommended Posts

Hey everyone,

Well ITs been a LONG time since I decided I was serious about wanting an import. I couldn't do anything until I sold my first car (Subaru Liberty) so I sold that, which was about 3 months ago. I was looking at mainly R32's, R33's, S13's (although not preferable) and 180SX's, with the odd glance at Stagea's or a Toyota of some description. After MANY arguements with Dad about Turbo's he finally agreed to letting me own a 4cyl Turbo, and I found one.

Its a 1998 (according to ID Plate, 1995 according to rego???) 180SX. Its done 111,xxx km's and the only mods are the clear tail lights, 3inch cat back exhaust and coilovers. The guy gave me the stock tail lights incase I wanted to change them, but might leave it for now.

Overall its in good condition, there is a few chips that have been covered on the roof and a few small scratches, but only noticable if you're really looking. The drivers seat is slightly pushed in/squashed from getting in and out but the inteerior is in great condition also. It runs well and the gears are nice, but I wouldn't know much as it is my first.

I picked it up saturday morning and not driven manual for a good couple of weeks (been driving my sisters car around the block every now and then) I managed to stall it leaving the guys house :ermm:

But now I'm doing a lot better and a lot smoother.

Anyway I didn't tell ANY of my mates and since my two best mates were coming back from QLD that night, I ddecided to go pick them up in it, what a surprise haha!

So I've been driving it around all weekend, stupid idea was a bay run today. Insane traffic banked up. Getting used to it slowly.

Now with the year mix ups, I just got a mate to Nissan FAST it using the VIN, and it said it was made in 95/07. Why would the ID plate say 98 but the VIN from the same plate say its a 95

(which is what it is rego'd as). Very confusing, is there anything I can check to determine the year? Did they even make non type X models in 98? My original theory was they sold all the Type X bits and replaced them with standard parts, but thats obviously not right. Anyone know why it'd have 98 stamped in?

But anyway, it drives, so here's a few quick snaps from my phone over the weekend:

l_0dab85e0fd7b444a98a1c119569e29ed.jpg

l_86a19205e8744c439250ee4273f640a7.jpg

l_1d8c10e90be34222aab037f70236141f.jpg

l_c566aebe703749ae831f37b9bfef688e.jpg

l_7128cdd560194793b69e014cf28e6548.jpg

l_a5b5e0039d9d4b3ba3969e7ac8c39e95.jpg

l_83df839d324f406d95c9ff862f5d53af.jpg

I will post better pics when I take them (probably next weekend).

Thanks for looking! Tom.

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Nice buy. I would personally be looking to replace them tail lights with a set of Type X rear tail lights :) what engine is it - CA or SR?

+1

get black drifteks on that and it will look king ,

let me know if you want to see what im talkin about ;)

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190377
Share on other sites

Wow quick replys.

Its a Blacktop SR20DET, Manual.

Pete, taken straight from the ad on carpoint: 'SR20 Black Top Motor, 3 Inch Exhaust System from the CAT Back, Coil Over Suspension, LED Tail Lights (Have original Tail Lights), Car Alarm / Immobiliser, Keyless Entry, CD / Mini Disk Player, Serviced & in good condition, RAA Checked & able to view report,

Complied December 2007'

So 98 can't be compliance date.

I won't be doing any mods for a while, or atleast until I build my bank account back up! I'll probably get a new head unit and the side window visors forst, then think about a Type X wing and tail lights and maybe a rear window spoiler. Rims, well I was thinking bronze/gold XD9's? But thats a long way off yet.

Interior pics will come later. Here's the one from carpoint:

4308188.jpg

Engine:

4209066.jpg

And Mitch care to share your pics?

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190405
Share on other sites

Yeah, XD9's aren't that expensive though mate. Just abit over $3,000 with tires. 18x8.5 and 18x9.5 with 35 offset would sit nice on that. Bit of dish etc. You wouldn't really need a kit on it, would look tough (and different) with the stock one on. That's all you would really need to do exterior wise. Keep it clean and keep it simple.

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190420
Share on other sites

yeah i like white 180's pretty much all 180's cept for champagne gold :)

if you want tinted windows and a better alarm ring Ric from Auto Perfection let him know Steve from Skylines Australia told you to go there

Don't get drift-teks, everyone has them. Wait for the AUS$ to strengthen and get some good Jap rims under yourself.

+1

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190421
Share on other sites

Thanks Steve, its actually got a Cyclops alarm, so its alright, will keep the tint in mind.

Unfortunately I gotta wait a while before I can spend any on it, as I did have to pay cash so my bank account is very low. Unlike most people my age, I have to pay for it myself.

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190431
Share on other sites

Thanks Steve, its actually got a Cyclops alarm, so its alright, will keep the tint in mind.

Unfortunately I gotta wait a while before I can spend any on it, as I did have to pay cash so my bank account is very low. Unlike most people my age, I have to pay for it myself.

Paid cash for mine when I imported it, was my first car and import, pay for all my mods cash too. You learn something new everyday about them. You've been on here long enough to know anyone here will help you when and if you need it. Just don't get yourself a girlfriend, work more, spendless and you'll have all the mods done before you know it.

How much you paying for insurance?

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190437
Share on other sites

Well since I'm a 17 year old male driving a turbo, comprehensive was something insane like $3k a year and I don't wanna know the excess.

So third party property, fire and theft is about $530 or something with an excess of about $1700 for an accident, and $1150 for fire and theft.

Link to comment
https://www.sau.com.au/forums/topic/239905-my-new-car/#findComment-4190442
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have copied the images in the original post from photobucket to the SAU servers to make sure they stay available.
    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
×
×
  • Create New...