Jump to content
SAU Community

Recommended Posts

hi y'all,

i have four wheels for sale

2x Chrome SSR Professer S1 17x8 +38 (unsure for offset and will confirm tonight) with brand new tyres.. 235/40 (or 45?)

2x Chrome SSR Professer S1 17x8.5 +28 (unsure for offset and will confirm tonight) also with brand new tyres.. 235/40 (or45?)

these wheels came on the car and have gutter rash and other scratches etc.

also have two 4mm spacers that were on the front of my car when it was purchased which the buyer can have

come over for a look or a test fit (i have a jack)

looking for $900 willing to negotiate (tyres alone were $640)

PS - im pretty sure that the fronts (17x8) will not fit on a R32 gts-t m-spec (4pot front calipers) without a spacer (unless you grind down the caliper cover). ZCR test fitted the rears and it looked... awesome!! fills the guards nicely

PPS - the picture below is the wheels on my car with the old tyres still on them

call 0410 149 689

Nerm

Edited by Ex!$t3nZ
Link to comment
https://www.sau.com.au/forums/topic/239949-fs-ssr-professors-s1/
Share on other sites

2x Chrome SSR Professer S1 17x8 +38 (unsure for offset and will confirm tonight) with brand new tyres.. 235/40 (or 45?)

2x Chrome SSR Professer S1 17x8.5 +28 (unsure for offset and will confirm tonight) also with brand new tyres.. 235/40 (or45?)

for some reason i cant edit my original post but i thought that i should point out that the stud pattern is 5x114.3 although the more astute readers will notice that i mentioned that ZCR had them on his 32 which as you all should know is 5x114.3 as well. Note sure if you guys knew that the JizZseX100 was 5x114.3 or not

whats the width????

and any pics of them on a 32 or what????

what do you mean by width.. in the original post i said that the fronts were 8 inches wide and the rears were 8.5.. or are you refering to the tyres which are 235/40 (or45) all around

no pics of the 32 unfortunatley..

i gave the number a call but the guy said it was the wrong number haha

oops my number us 0410 146 684.. my bad. i was at the physio anyway so i wouldnt have answered

im not sure if the wheels fit the front with the spacers.. i havent checked

tried calling that one and it says youve got incoming call restrictions activated haha.

wtf.. sim card must have slipped or something?? this phone has been giving me nothing but grief lately, i might need to get a new one..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Um. No. Since Matt introduced the TIM it has become a lot easier to deal with the consequences of changing K for AFM and injector swaps. Then, tuning is a f**king doddle. No-one needs to know or care how many grams of air are flowing or any other bullshit. Need more fuel in a cell? Add more fuel. Need more timing in a cell. Add more timing. Need to adjust any of the other tables for warm up and so on? No harder than anything else. Sure - it's not an ECU system for starting from scratch on an arbitrary engine. But then.....it was never supposed to be, not recommended for, and almost never used that way. So.... On your engine, in particular, Nistune/Nissan OEM is about as sophisticated and difficult as banging 2 rocks together. Those ECUs are primitive and simple. There is nothing difficult there. I learnt Nistune from scratch, created new maps with extended axes, interpolated/extrapolated the original maps onto them and tuned my RB20 (basically the same ECU as your 26 ECU) all by myself, more than 20 years ago. And that was long before even TIM.
    • Set of knee pads for a R34. Will fit every model I think. Comes with everything except the rubber covers for the bolt holes. Still in great condition. You will need to drill holes to mount these or use double sided tape. I can do free shipping and will be shipping from the Netherlands with tracking.
×
×
  • Create New...