Jump to content
SAU Community

Recommended Posts

hey guys

i need some help.. i want to get screamer pipes on my r32 gtr....

would i have to get them made up or is there some place where you can buy them that would fit??

if so how much do they usualy cost?

advice pleaseee!!

Edited by khamb

i dunno about a gtr screamer but an rb25det screamer is $100 from just jap.....

why cant you get a pair of these for $400, get an angle grinder and a welder and make your own screamer for $400 for a set for both turbos on your gtr???? it'll probably take you a good hour to make it up, just plan how your going to do it before you start cutting lol

http://justjap.com/store/product.php?produ...=276&page=1

So you have a big single, with external wastegate and so on?

Otherwise, with stock turbos, or internal gate turbos, its a waste and all the hot air is going to do is mince the rubber hosing

I'd say he just wants the "WAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH" when you floor it

my motor is being rebuilt as we speak. Forged pistons forged rods. Sump baffle garret 2860 turbos powerfc and much more. So the turbos just a little bit bigger.

And I want it to sound tuff when I get back. Im putting 13 grand into it. So I wouldn't want anything to wreck it I guess.

Dumb question what's an external gate and where isit located

I've only still got a stock cooler! If that helps LOL

I'd say he just wants the "WAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH" when you floor it

And your exactly right LOL I do want to hear the sound of waaaaaaaaahhhhh when I floor it

Good stuff mate!

waste of time with your small twins. they have internal wastegates. internal wastegate turbos are not designed to have seperate pipes from the wastegate and the turbine outlet. you can tell this as there is just one outlet and one flange for both. on an external wastegate set-up you have a seperate wastegate and it has it's own outlet. most often people will merge the wastegate oulet pipe with the turbine outlet pipe somewhere along the exhaust. some however leave the wastegate pipe to vent to atmosphere (a screamer pipe).

it is possible you could get some kind of frankenstein set-up to try and vent your internal wastegates to atmosphere but it won't have good result. you will have a constant exhaust leak and your car will sound like some kind of tractor most of the time. all the exhaust in your engine bay will possible melt stuff and discolour everything. and it wont sound that great either when the wastegates open. seriously, don't bother. you want a screamer then you need a turbo that does not have an integrated wastegate. also, they are highly illegal in every state of australia and if you are caught with one you could find yourself with a serious problem.

I am running hacked up HKS dumps on my twin rr581 low mounts. As long as they have welded in a seperate plate between the turbo wheel outlet and the wastegate inside the dumps it will sound fine at idle, its when ppl don't do this that it will sound bad.

I didn't really do myn for sound, I was actually looking for just a good set of HKS dumps without the screamer, just happend to get these off JPS for a damn good price second hand. They sound sweet but, just like any other screamer I have heard, and they are a definately an improvement as far as exhaust restriction is concerned.

Try hit up importmonster and they like, they are readily available through yahoo japan second hand.

post-13028-1224033479_thumb.jpg

Edited by James_03
i dunno about a gtr screamer but an rb25det screamer is $100 from just jap.....

why cant you get a pair of these for $400, get an angle grinder and a welder and make your own screamer for $400 for a set for both turbos on your gtr???? it'll probably take you a good hour to make it up, just plan how your going to do it before you start cutting lol

http://justjap.com/store/product.php?produ...=276&page=1

so you guys are saying I shouldn't get it going to atmosphere. Would those dump pipes in the link above be suitable. And would dump pipes sound anything close to a screamer.

I wouldn't want it have a leak at all. But I've seen before on r32 gtr with the same turbos and it was screaming at the same time but I don't know his setup and there was no leaking sound and at the same time was sounding very good at idle. Couldve been dump pipes though!

Sounded bloody tuff though!

there is no way you could get a perfect seal between the wastegate and exhaust sides of the housing. and as more exhaust gasses pass through the dump pressure increases and the leak becomes more noticeable. hence why they dont sound the same as proper gate there isnt the same "snap open, snap close" of the gate due to the leak.

put some of your 13grand twoards getting turbos without internal gates and then set yourself up with sopme external gates and screamers if you want to do it properly

Well there you go, proved wrong again by the people that have never done it.

Say no more.

well james 03

do u have interanally gated turbos?

if so does your setup work.

also will dump pipes give and screaming??? at all. or is a waste of my time guys????????????????????

I am running hacked up HKS dumps on my twin rr581 low mounts. As long as they have welded in a seperate plate between the turbo wheel outlet and the wastegate inside the dumps it will sound fine at idle, its when ppl don't do this that it will sound bad.

I didn't really do myn for sound, I was actually looking for just a good set of HKS dumps without the screamer, just happend to get these off JPS for a damn good price second hand. They sound sweet but, just like any other screamer I have heard, and they are a definately an improvement as far as exhaust restriction is concerned.

Try hit up importmonster and they like, they are readily available through yahoo japan second hand.

sorry mate where could i get those from...

do they sounds good though..

what is the ruff price on those shown in images

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...