Jump to content
SAU Community

Recommended Posts

Rank: RB20DET

pip.gifpip.gifpip.gif

Posts: 75

Joined: 13th June, 2007

Car(s): gtst

Trader Rating : 4

Warn: (20%) warn1.gif

spacer.gif

I am selling an r33 gtst series 2 manual.

The car is white it has about 140,000 k's on the clock paintwork is imaculate all over no dints chips or scratches and is all the same shade of white.

i done the major service on it at 100,000 k's a year ago which involved changing all the oils, water pump, plugs coolant, thermostat and oxy sensor. since then though i have still got it serviced every 5,000k's with mobil 1 which i have reciepts for all services and the plugs and coolant and fuel filter have also been changed since then.

A new exedy heavy duty clutch was also put in 5000ks ago along with a new starter motor. Car also has other mods which support a fairly large power figure.

This car is absolutely faltless inside and out, all the interior is standard series 2 even the cd player, the car also has factory fitted abs . It rides on 18 inch dished wheels with yokahama rubber, brakes were also changed and machined all round about 3500 ks ago.

Over all car is perfect doesnt need a cent spent on it for a very long time looks unbelevable and drives beautiful, has alot more modifications and detials i wont mention but if you are interested i can be contacted on 0437078793 my name is robert and i am located in melbourne. car also has 14 months registration on it and will be supplied with a current road worthy certificate by workshop of buyers descression. price is also negociable.

TIMING BELT ALSO DONE AT 1000000

Car also has other mods which support a fairly large power figure

can you elaborate on this?

gcg turbo , microtec walbro 500 hp pump, intercooler hks, custom air intake system, injectors, full hks exaust!!!! do i need to say more!! much time and money has been spent on this car and its time for me to grow up so you know tyhe rest!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had I known the diff between R32 and R33 suspension I would have R33 suspension. That ship has sailed so I'm doing my best to replicate a drop spindle without spending $4k on a Billet one.
    • OEM suspension starts to bind as soon as the car gets away from stock height. I locked in the caster and camber before cutting off the kingpin. I then let the upright down in a natural (unbound) state before re-attaching it. Now it moves freely in bump and droop relative to the new ride height. My plan is to add GKTech arms before the car is finished so I can dial camber and caster further. It will be fine. This isn't rocket science. Caster looks good, camber is good, upper arm doesn't cause crazy gain and it is now closer to the stock angle and bump steer checks out. Send it.
    • Pay careful attention to the kinematics of that upper arm. The bloody things don't work properly even on a normal stock height R32. Nissan really screwed the pooch on that one. The fixes have included changing the hole locations on the bracket to change the angle of the inner pivot (which was fairly successful but usually makes it impossible to install or remove the arm without unbolting the bracket from the tower, which sucks) and various swivelling upper arm designs. ALL the swivelling upper arm designs that look like a capital I (with serifs) suck. All of them. Some of them are in fact terribly unsafe. Even the best one of them (the old UAS design) shat itself in short order on my car. The only upper arm that works as advertised and is pretty safe is the GKTech one. But it is high maintenance on a street car. I'm guessing that a 600HP car as (stupidly, IMO) low as you are going is not going to be a regular driver. So the maintenance issues on suspension parts are probably not going to be a problem. But you really must make sure that however your fairly drastically modded suspension ends up, that the upper arms swing through an arc that wants to keep the inner and outer bolts parallel. If the outer end travels through an arc that makes that end's bolt want to skew away from parallel with the inner bolt, you will build up enormous binding and compressing forces in the bushes, chew them out and hate life. The suspension compliance can actually be dominated by the bush binding, not the spring rate! It may be the case that even something like the GKTech arm won't work if your suspension kinematics become too weird, courtesy of all the cut and shut going on. Although you at least say there's no binding now, so maybe you're OK. Seeing as you're in the build phase, you could consider using R33/4 type upper arms (either that actual arm, OEM or aftermarket) or any similar wishbone designed to suit your available space, so alleviate the silliness of the R32 design. Then you can locate your inner pivots to provide the correct kinematics (camber gain on compression, etc).
    • The frontend wouldn't go low enough because the coilover was max low and the upper control arm would collapse into itself and potentially bottom out in the strut tower. I made a brace and cut off the kingpin and then moved the upright down 1.25" and welded. i still have to finish but this gives an idea. Now I can have a normal 3.25" of shock travel and things aren't binding. I'm also dropping the lower arm and tie rod 1.25".
    • Motor and body mockup. Wheel fitment and ride height not set. Last pic shows front ride height after modifying the front uprights to make a 1.25" drop spindle.
×
×
  • Create New...