Jump to content
SAU Community

Recommended Posts

Hi, just bought my first car today, which just happens to be an r34, and noticed the cover said twin cam 2000

Since im new to them im not sure how to tell if its a rb20 or rb25 and i cant find it written anywhere in the engine bay.

I was told it was a 2.5L which would be a rb25 right? going to be pretty pissed if its not.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/
Share on other sites

Engine no. is rb20237187b

Which would seem it would be an rb20, but i thought id post this anyway just in the hope that i was wrong... And like i said, i was told it was an rb25, personaly i thought they mainly came in rb25's. Had road worthy done, racq check, no where did it say on it or anything, didnt concern me at the time. Was only bought for $13500, which for an r34...damn cheap. And all this wouldnt be a problem accept...he said it was a 2.5L on carsales, which would be false advertising.

Heres the link if you wanna see for your selfs.

http://www.carsales.com.au/used-cars/priva...amp;Make=NISSAN

Edited by Darkplague
Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4197897
Share on other sites

Arnt they R33 wheels?

Yeah they are, pretty dodgy, ill be replacing them rather soon so i dont really mind.

The guy i bought it off reakoned he bought it like that.

Edited by Darkplague
Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4197983
Share on other sites

You sir have purchased a R34 GT which accommodates a RB20DE NEO (GT - 2.0 L RB20DE NEO I6, 155 ps (114 kW))

I too used to be under the impression that the RB25 was the minimum capacity for the R34, but I was wrong. Read the wiki, it tells you about it. http://en.wikipedia.org/wiki/Nissan_Skyline

And yes nizmo man, they are reported to be the most economical RB ever made.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198066
Share on other sites

WTF. i could have bet my testicles in certainty that the r34 never came out with the rb20. thank god i found this little piece of info.

now time to start a convo with my mates and wage a few $$$

btw for the miss-advertising u can take it up with him and see if u can negotiate a price difference of some sort since its misleading statements.

Edited by philta
Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198311
Share on other sites

don't buy cheapies

Thats fair enough mate but...there was nothing wrong with it, exterior was fine, interior was fine, mechanicly it was fine. Theres nothing wrong with it, but its not what was advertised which is what im trying to explain. Even if it i bought it for 19 thousand, theres still the chance of the same thing happening.

Ill get a picture up soon, camera decided not to save the picture and now im at work.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198475
Share on other sites

You might want to look into that. I've heard that R34s with an RB20 engine aren't able to be complied and registered in Australia. I'm not sure exactly why though, so it could be bollocks. Though that explains why you never ever see them here.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198480
Share on other sites

mate.. he did not do any false advertising.

that thing is so uncommon that carsales doesn't have an auto option of R34 GT and 2.0L.

those fields are auto fields from carsales.. you just have to pick on.

he SHOULD have said this is a 2L RB20DE in the body of the ad, but he doesn't have to.

Anyway, you got a $13K R34.

for $7K you could get an RB25neo in there and upgrade the brakes.

so you are then up to a cheap R34 GTT price range.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198779
Share on other sites

[quote

for $7K you could get an RB25neo in there and upgrade the brakes.

And a stronger gearbox, not the poor old FS5W71C from back in R32 days.

Seller didn't show much integrity when using the standard Carsales defaults.

You can always write a story in the Comment section, explaining that the engine is actually an Rb20, not an Rb25.

post-13483-1224117850_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198821
Share on other sites

Thanks for the info guys, ive never had to sell a car, so i didnt know how carsales work, but like you said GTST should of said it in the comments. And it was only $13500, so cant expect to much from it.

But whats this about not being able to register in australia? It was registered in Tasmania but i dont know if you count that?

(Im not trying to be a jerk i seriously dont know)

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198892
Share on other sites

You sir have purchased a R34 GT which accommodates a RB20DE NEO (GT - 2.0 L RB20DE NEO I6, 155 ps (114 kW))

I too used to be under the impression that the RB25 was the minimum capacity for the R34, but I was wrong. Read the wiki, it tells you about it. http://en.wikipedia.org/wiki/Nissan_Skyline

And yes nizmo man, they are reported to be the most economical RB ever made.

Yeah damn... Your right, I too never thought the R34 came out with a RB20DE.

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4198965
Share on other sites

Yeh sadly the R32,33 and 34 got given RB20s in some models!

Enjoy the fuel bills. But not the performance :(

Thats abit rough that you didnt get what you were hoping. Did you only notice the 2000 on the engine after you bought it?

Buyer beware I guess, research into anything thats gonna cost you a fair bit of dosh!

Link to comment
https://www.sau.com.au/forums/topic/240347-rb20-or-rb25/#findComment-4199048
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...