Jump to content
SAU Community

Key Recognition

BenzLe
 Share

Recommended Posts

BenzLe Contributor

BenzLe

Posted
Posted

Hello Guys,

My V35 only came with the one key. I had the dealer in which I purchased the car from order the key from Japan.

When it arrived, the dealer had problems trying to get the car to recognise the key. Apparently there was a list of instructions but they are in japanese.

Does anyone know how I can get the car to recognise this new key? Any help will be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/
Share on other sites
Aj007 Explorer

Aj007

Posted
Posted
Hello Guys,

My V35 only came with the one key. I had the dealer in which I purchased the car from order the key from Japan.

When it arrived, the dealer had problems trying to get the car to recognise the key. Apparently there was a list of instructions but they are in japanese.

Does anyone know how I can get the car to recognise this new key? Any help will be greatly appreciated.

Good luck mate. i'm having the same problem. no one in aus can program the transponder! if you find a way, PLEASE LET ME KNOW!

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4199349
Share on other sites
FlyingEL Rising Star

FlyingEL

Posted
Posted
Good luck mate. i'm having the same problem. no one in aus can program the transponder! if you find a way, PLEASE LET ME KNOW!

Please look at past topic on this, someone do have the solution to it. It has been discussed many times here already.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4199596
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

there is a thread on this.

short version:

findthe BCM - copy all the numbers off it. send a email to nissan japan requesting the immobiliser codes. cut and program new key with consult.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4199745
Share on other sites
BlackKnight Newbie

BlackKnight

Posted
Posted

**Solution if your in Sydney**

I had the same problem with only having one key. I ordered a spare key and took it to Hornsby Nissan as I've been told they've been successful in programming these keys. They had it programmed within an hour :P

It set me back around $85 to get it programmed.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4199770
Share on other sites
BlackKnight Newbie

BlackKnight

Posted
Posted

Yeah it's strange, the guy from the dealer I ordered the key through said they couldn't do it. However while speaking to the guy from Hornsby Nissan, he told me they use the same tools as other Nissan Service centres so he couldn't understand why others can't do it...maybe they have the magic touch? lol

He told me they've had about 6 V35's come their way so these guys don't get scared when they hear 'import'.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4200273
Share on other sites
Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted

Most Nissan Dealers talk to each other direct via their own Nissan Forum... they can transfer knowledge to each other this way. If you have someone you know ask them to get in touch with Honrnsby Nissan, with using this process.

Surely they will help especially if it is just using the current equipment

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4201251
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
Most Nissan Dealers talk to each other direct via their own Nissan Forum... they can transfer knowledge to each other this way. If you have someone you know ask them to get in touch with Honrnsby Nissan, with using this process.

Surely they will help especially if it is just using the current equipment

exactly.

if they have a consult 2 or 3 and the immobiliser code then they are happy. programming the key is the easy bit (on assumption of a scan tool or consult 2/3.) the codes are the hard bit from your end. without those you can key the remote entry in but not the NATS system.

Link to comment
https://www.sau.com.au/forums/topic/240439-key-recognition/#findComment-4204184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • mtopxsecret6
      Drivers R32 GTR seat

      By mtopxsecret6 · Posted

      Hi everyone, just looking to see what's available in the GTR seat options, testing the waters on what's available. Wanting a driver's seat to replace my old school OG jap race seat, going to re-register the car so need a factory seat. Prices currently seem to go from $300 to $2k for a driver's seat. What's options are there, that's good condition and actually a realistic price? Located Brisbane. Thanks
    • mtopxsecret6
      AP Engineering Power Fc for RB20DET

      By mtopxsecret6 · Posted

      Are these a plug and play setup, and do they need a tune, like a haltech ecu etc? Thanks
    • Milkmun
      MLR's Bogan cruise ship

      By Milkmun · Posted

      Nice work on the paint. Those 3 studs are long as. 
    • mtopxsecret6
      WTB R32 2door interior parts

      By mtopxsecret6 · Posted

      Hi everyone, still chasing a bunch of this stuff. Thanks
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
×
×
  • Create New...