Jump to content
SAU Community

Recommended Posts

a couple of weeks ago i was parked outside my bedroom window and at exactly 6am wednesday my alarm went off.

i ran outside naked lol and chased the guy down cross road but lost him in the back streets. when i got back to my car this is what i found :D.

keep in mind these photos where taken after the cops dusted for finger prints.

they bent the steel out on the drivers door handle, damaged the rear left quarter under the window (trying to pop out the window) they also stuck something into the boot lock, then they tried to pop the passanger door handel out and tried sticking something between the door and the panel and tried to bend the door out, and in the end they smashed the passenger window and took off when i came out to kill them. and thanks to pearce crash repairs it only cost me $400 to fix it all cos im to lazy to do it myself.

and the new window came courtesy of Z IMPORTS-wally is the best.

post-55216-1224209588_thumb.jpg

post-55216-1224209609_thumb.jpg

post-55216-1224209630_thumb.jpg

post-55216-1224209648_thumb.jpg

post-55216-1224209676_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/240579-mass-damage-during-break-in/
Share on other sites

that's horrible man, glad it's sorted now though.

By the looks of what they've done though, they can't have been that bright. As trying to pry off a door handle would work to open it, but just take far too long, and they probably would have gone through just as lengthy a process trying to start the car

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

Similar to what happened to my car once, although its nowhere near as bad as that... seems like someone was trying to pull out the lock with screwdriver... when the alarm went off he ran away and had to settle for the gt badges, lol...

Directed Electronics dual zone motion sensor ftw. Stops scums before they even try to do any shit to your car.

yeah those were some dumb ass criminals, trying to steal a car that was only 5 metres from where you were sleeping! :D

yeah there are some stuipid people in adelaide ive heard of this guy called dr_hoon45 lol hi chris long time no see

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

nah im down in edwardstown right near the cross rd and south rd intersection lol great place to do some public nudity and as for howies comment (+1 for shaved door handles?) nah i got it all repaired to standard ill post some pics of it now.

thats almost exactly like what happened to my car. the tried to pop the rear window out on both sides and ripped my door handle out, bent all the seals etc.

what area was this in? ttg or modbury way?

the cops wouldnt even come out to have a look at my car yet there were finger prints everywhere. your pretty lucky!

sorry to see about your car though!

as soon as i read it, thats exactly what i thought too kye :S

glad to hear you got out of it not too bad mate. And lets hope they get whats coming to them soon.

How much that cost you champ?

it only set me back $400 and he even fixed a little dent on the rear right :thumbsup: heres some pics. ill get is sprayed after i throw on a gtr front end

the work that was done included straightening all the primed parts and preping and priming, rebuilding all the locks inlcuding the boot lock (as they were all destroyed internally and i didnt want to have to change the ignition to match the rest), replacing the passanger window which was supplied by wally at Zimports and cleaning all the glass out of the car, all was completed overnight. pearce crash repairs are bloody legends.

post-55216-1224396892_thumb.jpg

post-55216-1224396938_thumb.jpg

post-55216-1224396974_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...