Jump to content
SAU Community

200awkw From R32 Gtr

BillyMako

By BillyMako,
in Engines & Forced Induction

 Share

Recommended Posts

N1GTR Grand Master

N1GTR

Posted
Posted

If you do a search you will see all ths info quite easily.

Basically;

-New ECU (Power FC, Autronic, Haltech e11v2, microtech lt12s, HKS fcon - whatever)

-14psi on stock ceramic turbos (any good EBC will do this, if budget is a problem get a cheap bleed tap)

-Decent front pipes (Jap brands come up 2nd hand often, or get something like xforce from justjap)

-Highflow cat (there's a group buy on for them)

-Decent cat back exhaust (same as front pipes) Make sure it flows well, so check out whats on there now as that may suffice

That will get you around 225awkw, or 250rwkw

You do not need to change from the stock airbox, that will save you some money. To have real fun, get a set of coilovers in there and a decent clutch (multiplate), then you're sorted until you want more power - then there's a world of options

Enjoy!

Tangles Grand Master

Tangles

Posted
Posted

as said make sure the exhaust is complete (turbo to muffler tip) and high flowing

grab a good high flowing panel air filter

look for a good ebc to bring on boost quicker, and to up it to .8bar, and there is the 200rwkw easy

look for a power-fc, a set of z32 afm's, set of drop-in injectors, and she's good for 250rwkw plus1

MrStabby Grand Master

MrStabby

Posted
Posted
they virtually make 200rwkw outta the block, around 170rwkw or something

A simple exhaust, and boost up to 12psi will do it easily

Listen to this man - the other suggestions are far more than what's required.

Might be worth a dyno run to check that you're already around the 175-200 mark and that mixtures are good and there's no ping. Ie check everything's in good working order before making any changes, and fix anything that's broken. Then do oil change and filter, air filter, fuel filter and check or change the plugs.

Tomei_33 Rising Star

Tomei_33

Posted
Posted
they virtually make 200rwkw outta the block, around 170rwkw or something

A simple exhaust, and boost up to 12psi will do it easily

+1

I don't know why u guys are listing so much stuff then saying it will make 250rwkw.. he only wants 200rwkw and R31Nismoid has answered the question pretty straight forward.

std injectors and afms will make 250rwkw easily.. so no need to upgrade them.. no need for tune as its only an extra 20kw from standard..

Johnny Veteran

Johnny

Posted
Posted

Thing is: 200awkw will feel fast for about 10days then you'll be chasing more.

Push stock turbos which blow then upgrade to larger turbos and the engine blows then rebuild engine and max out turbos........then upgrade to large single and push it until gearbox blows then upgrade gearbox then house gets repossesed and you live in car tryna make ends meet by racing for pink slips and end up getting smoked by johnny tran.

Tomei_33 Rising Star

Tomei_33

Posted
Posted
Thing is: 200awkw will feel fast for about 10days then you'll be chasing more.

Push stock turbos which blow then upgrade to larger turbos and the engine blows then rebuild engine and max out turbos........then upgrade to large single and push it until gearbox blows then upgrade gearbox then house gets repossesed and you live in car tryna make ends meet by racing for pink slips and end up getting smoked by johnny tran.

we talking fast and furious johnny tran? or u? :D

but yea its true, once u get 200rwkw then the thirst for more power will get to ya :)

omega36 Proficient

omega36

Posted
Posted
Thing is: 200awkw will feel fast for about 10days then you'll be chasing more.

Push stock turbos which blow then upgrade to larger turbos and the engine blows then rebuild engine and max out turbos........then upgrade to large single and push it until gearbox blows then upgrade gearbox then house gets repossesed and you live in car tryna make ends meet by racing for pink slips and end up getting smoked by johnny tran.

haha, this sounds about right :)

Johnny Veteran

Johnny

Posted
Posted
we talking fast and furious johnny tran? or u? :(

but yea its true, once u get 200rwkw then the thirst for more power will get to ya :)

SWAT came into my house, disrespected my whole family because someone knarcked me out.......and u know what tomei_32...IT was U!!!

lolz! I remember getting my 255awkw and i was stocked for about a week and now im comtemplating a big single lolz.

Anyone else like this?

-Stokesy- Collaborator

-Stokesy-

Posted
Posted
lolz! I remember getting my 255awkw and i was stocked for about a week and now im comtemplating a big single lolz.

Anyone else like this?

I was exactly the same. My mate told me that I'd never be happy with the power of my car and i didn't believe him... I got my car tuned and had 265awkw and within a week i was saving to get some new turbos...

dam mod bug :)

LotusGTR Veteran

LotusGTR

Posted
Posted

I got 190 something at the wheels with the boost restrictor bored out (0.95bar?) and an average cat back zorst on it. No other mods at all.

With new steel turbos (sorry, not sure what they are) that are not much larger than std (if at all) and the boost ramped up (again, short on details) my car made 260-270RWKW with no other mods other than the zorst. This was a fresh engine with full bottom end re-build (but that is not likely to affect power so much as reliability).

Hope this helps.

Johnny Veteran

Johnny

Posted
Posted

Seriously it shocked my exactly how amazing the RB26 engine is; i mean like the sr20 in my 15 was a good motor and responded well to a FMIC, EBC, Exhaust etc but only managed 166kw

The GTR just gains power for very little money and this bloke who is asking for 200awkw will be in for a shock when he's pumping out 230-250awkw for only a couple of grand.

"It is like an eclipse of the sun, it is bad for you to look.....but you must look"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...