Looking To Borrow Blind Hole Bearing Puller

[CrispyFries]

Does anyone have a blind hole bearing puller I can borrow?

looks something like this.

Cheers

[jesiotrot]

What on earth are you up to Justin???

[Jamezilla]

[CrispyFries]

What on earth are you up to Justin???

Oddly enough removing a bearing Spigot bearing to be precise.

When I did the auto to man conversion on my soarer way back when I rented one of the above to pull the bearing, it was awesome when other types failed, can't remember the name of the place though

With gauge? More boost!!

[Rowdyr32]

You pack the spigot bearing with grease and find something the same dia as the spigot inner dia like an old shaft or machined down bolt. Must be very close fit and use a hammer.

Works every time. The grease pushes the bearing out.

Try it and see.

[Swiper the Fox]

You pack the spigot bearing with grease and find something the same dia as the spigot inner dia like an old shaft or machined down bolt. Must be very close fit and use a hammer.

Works every time. The grease pushes the bearing out.

Try it and see.

Yep...what he said

[CrispyFries]

well the pilot bearing is out, but now I need to get the pilot converter out of the auto engine, no way to get grease behind it... and the company I rented the puller from last time (hire-it - street view to the rescue) no longer have one

[acsplit]

die grinder or drill a hole in it. then use a chisel to break it. (be careful not to grind into the back of the crank)

[CrispyFries]

I need to reuse it replacing the engine in my gf's auto silvia, replacement engine came from a manual.

Looks like I'm going to have to overnight it from Japan (ie wait 10 working days)