Jump to content
SAU Community

R34 Gtt Rear Strut Bar

arch6
 Share

Recommended Posts

arch6 Explorer

arch6

Posted
  • Author
Posted

Thanks for the photos, Satanic.

I was trying to figure how it would fit under the boot hinges.

I guess its quite different from the R33, where that had a bracket that sticks out as well.

From the photos, you had to cut the lining right? Just a small slit?

Yeah, the rear strut doesnt do much.

My R33 felt the same when I installed one.

Mainly for looks. :ninja:

Damn, why cant Nissan make more parts compatible between the R33 and R34 :down:

br3ndan Mentor

br3ndan

Posted
Posted
i hear that it makes little to no difference...front strut and sways will be all u need...after coilovers or a spring/shock combo of course...

Can confirm that.

The front strut made a massive difference... best bang for buck in regards to handling mods for sure! 2nd hand cusco front strut braces are 100-150 depending on condition. Piece of cake to install as well.. Not sure why these didnt come stock ?

satanic Grand Master

satanic

Posted
Posted
Does the strut make much of a difference? Keen to put one in mine when I can.

Made heaps of difference on mine, tightened up the rear end a lot.

i hear that it makes little to no difference...front strut and sways will be all u need...after coilovers or a spring/shock combo of course...

You're hearing wrong... and no, those parts are not ALL you need... furthermore, R34s came standard with a front strut brace that more than does the job, why the hell would you replace it? So tell me why you'd NEED to do that?

Thanks for the photos, Satanic.

I was trying to figure how it would fit under the boot hinges.

I guess its quite different from the R33, where that had a bracket that sticks out as well.

From the photos, you had to cut the lining right? Just a small slit?

Yeah quick n easy install... those photos are almost 2 years old now. Some dude who did it in Japan had to grind away the edges on the brackets as he was fitting it to a 4 door. As for the trimming, you are spot on, just a small cut here n there so the brackets fit through.

Can confirm that.

The front strut made a massive difference... best bang for buck in regards to handling mods for sure! 2nd hand cusco front strut braces are 100-150 depending on condition. Piece of cake to install as well.. Not sure why these didnt come stock ?

Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

br3ndan Mentor

br3ndan

Posted
Posted
Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

Obviously not.

You can clearly see my avatar has an r33 in it.

and under that it says my car is a r33.

so now you can see how its a bang for buck handling product.

MrStabby Grand Master

MrStabby

Posted
Posted

If your car has a subframe that all the rear suspension arms bolt onto, the rear strut brace does nothing as the subframe provides excellent rigidity. If the upper arms bolt onto the body (like in the front) then it would be worthwhile.

satanic Grand Master

satanic

Posted
Posted

Remove rear trims... all will be revealed. On each side there are 2 threaded rods poking out, this is where the Cusco brackets bolt to. It's almost as if Nissan was going to put that exact item there, but ran out of money or something.

ITZTRU Proficient

ITZTRU

Posted
Posted
Made heaps of difference on mine, tightened up the rear end a lot.

You're hearing wrong... and no, those parts are not ALL you need... furthermore, R34s came standard with a front strut brace that more than does the job, why the hell would you replace it? So tell me why you'd NEED to do that?

Yeah quick n easy install... those photos are almost 2 years old now. Some dude who did it in Japan had to grind away the edges on the brackets as he was fitting it to a 4 door. As for the trimming, you are spot on, just a small cut here n there so the brackets fit through.

Are you talking about the same car here? R34s did come standard with a front strut brace, not sure how that can be "bang for buck".

Umm...relax? I read/heard from SydneyKid's threads...so go tell him he's wrong. I'm just passing on what I heard/read. I didn't say R34's didn't come with one standard...nor did i say it needed to be replaced...I was simply saying that thats probably all he would need for a decent setup...

  • 8 months later...
allthewaytotheskyline Mentor

allthewaytotheskyline

Posted
Posted

a bit of an old dig up on a thread (although i thought better reviving one then making a duplicate).

my question is where can i get one of these rear strut braces...i know cusco make them but cant find one...

cheers in advance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      so I need a new speedo cable 
    • tsuokun
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By tsuokun · Posted

      Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • niZmO_Man
      R32 gtst speedo out by 10kph

      By niZmO_Man · Posted

      Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • niZmO_Man
      Rv37 400r questions

      By niZmO_Man · Posted

      +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...