Jump to content
SAU Community

Recommended Posts

Just wondering what does the Trans fluid does in your tank??

is it safe??

"Other things that will help are cleaning the injectors (one of the best things is to put a bout 250mls of Auto-Trans fluid in the tank next time you fill it up), between doing this and replacing the fuel filter it will make a big diference. "

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/page/2/#findComment-561428
Share on other sites

Jimbo, 1000rpm idle is too high unless your engine stalls at a lower rpm (a/m cams for example maybe). Try setting it to around 700 or so and see if it gives you any issues. The lower the idle speed you can get, the better.

Teka, I have nfi what transmission fluid will do in your fuel, but whatever the alleged benefits, don't you think you would be better off buying some proper injector cleaner?

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/page/2/#findComment-561440
Share on other sites

The ATF trick comes from a qualified mechanic, he says its as good as injection cleaner and works even better if they are real dirty. Ive done it on my car with no problems. If you want just use injection cleaner, ive done both.

All ATF does other then cleaning all the shit is lubricate everything

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/page/2/#findComment-564826
Share on other sites

  • 2 weeks later...

it seems to have fixed itself after the cruise, the engine got a good workout!!! only got about 300km from that tank but filled up on the way home and it lasted 448km... see what happens next fill, then go onto oil change that is due soon, then the gaps after that!!!!

bit of a spin out :D

will keep posted

Link to comment
https://www.sau.com.au/forums/topic/24173-economy/page/2/#findComment-577789
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would be looking at the tune mate. How do you know that you have such a low dynamic compression?  I had to dumb mine down because it was too jumpy when taking off (too much torque).  What ECU? Do you need help with the tune? 
    • Surely the cam timing is set to something stupid at low RPM?
    • Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
×
×
  • Create New...