Jump to content
SAU Community

Recommended Posts

Stock R33 bottom end before I rebuilt it (not due to failure of bottom end, just crank keyway) managed 352RWKW for ages no probs and reved her up to 8500rpm. Serviced it every 5000k and then 3000k's though, oil and filter.

600HP at the crank is a well known limit for a stock bottom end.

Rods are good for 400rwkw plus.

Pistons are pretty good, but will only take so much detonation/poor tuning before they fail.

Crank will take a lot, cars running up to 1000hp.

Oil pump and drive is a big problem with 32 cranks especially.

Blocks are good for a lot, unless bored out excessively, 1991,1992 had issues with cracking. N1 block (24U) is the serious block for big power...

Thats a quick rundown, other guys will add what I have missed. There is also a s%#t load of info when you do a search too.

Cheers.

Edited by GTRsean
  R31Nismoid said:
Did you try the search button?

http://www.skylinesaustralia.com/forums/Po...+internals+rb26

There are plenty more threads where that came from too.

Please have a search around.

na i didnt even think about it, sorry guy and gals.

so with what i have read and researched 315kwatw is a safe power output for my `93` 32gtr?

the next stage of my car mods will be a engine rebuild but not for another 6-8 months (to raise funds), ive had garrett gt2860r turbos put on about 3 months ago and with them running at 40% ( about 10lb boost) the car still made 315kwatw, when they tuned it i told them i wanted it at a very safe level for standard internals but really when it comes down to it i have know idea whats on the inside, for all i know it could be chocka block full of jun parts.

and if anyone wants to know martin donnan tunes my car

cheers

Usage makes a huge difference my 32gtr let go on the track making 427 hp at the wheels on a stock bottom end

I suspect would still be kicking hard of it wasn't used on the track. No oil mods just a catch can and baffled rocker covers!

next on will have all the oil control mods under the sun. there is a huge thread on oil control mods for drift track on here just search

sydneykid started the thread I think.

  noone said:
Usage makes a huge difference my 32gtr let go on the track making 427 hp at the wheels on a stock bottom end

I suspect would still be kicking hard of it wasn't used on the track. No oil mods just a catch can and baffled rocker covers!

next on will have all the oil control mods under the sun. there is a huge thread on oil control mods for drift track on here just search

sydneykid started the thread I think.

i only use the car as a weekend cruz car, i havent had it on the track yet living in sa no one has much of a chance gettin their car on the track

  nemo said:
Just wanting to know the limits of a rb26 before u should put forged internals in it, or what power has people got in their rb26 with standard internals, mine has 315kwatw.

we ran cats race car (r32 gtr engine with 100,000+ kms) at 340rwkw for 2 seasons in da before she killed it doing donuts :P

  URAS said:
we ran cats race car (r32 gtr engine with 100,000+ kms) at 340rwkw for 2 seasons in da before she killed it doing donuts :)

I remember seeing her in da dvd serious performance 7; seemed so innocent but she will blow your bottom end.

  Bumblebee said:
ive spent around 20k... lol

Not bad mate; pretty much a whole car worth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...