Jump to content
SAU Community

The Yen Vs The Aud


Baz
 Share

Recommended Posts

Well I think this graph speaks for itself :(

http://www.x-rates.com/d/JPY/AUD/graph120.html

Since July 21 the value of the AUD dollar to the Yen has almost halved in value. Depressing sign to see that many of the parts coming out of Japan will almost be double in price to what it was about 3 months ago. Damn depressing to see but lets hope it picks up again as fast as it dropped so we can get decently priced parts out of Japan once again.

Link to comment
Share on other sites

Any parts worth buying in Oz...

Cant see the Oz dollar coming back for awhile..Expect to see the Yen and Green back strong for awhile...

I feel sorry for poor buggers from oz doing snow trips here..their cost of the accomo has nearly doubled ...

Link to comment
Share on other sites

Hi fives to me for buying my GTR in June when the oz dollar was 97 yen. Also got some parts ordered and fitted before the slump.

New turbos are going to have to wait a while I think. Everything has gone up 30% ++++

Link to comment
Share on other sites

I managed to get in a set of nismo injectors, bride seats and rails before the dollar droppped ;)

I just paid 1650 trade price for a nismo gt lsd pro tt model 1.5 way, it hurt but it was better than another quote i got for 1860 :S

I sill have a clutch and rims to go, i dont know how long i can wait for the dollar to improve, i know nismo will stop making the rims at some point :P

Link to comment
Share on other sites

i thought you were over the poncams thing?

Nah lol. I finish uni exams in a few weeks and start working more hours during the holidays so gonna take the head off and do some work to the car, havn't really done much to it lately. Got the gasket kit, valve springs, arp head studs etc, just need to get some poncams. Wondering whether to bite the bullet and just fork out the ridiculous price for all the parts these days...

Link to comment
Share on other sites

I bought my GTR when it was like 105 yen, so i was very lucky!

+2 near the hundred mark and before the luxury car taxes!!

4.6million yen was the cost of the car; now would be the high side of 80thousand before importing and taxes.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
    • So, to run the 4g aerials to the booster, I had to get access to the rear bulkhead....bit of a mission. Hot tip, don't offer to help change the rear shocks for a mate with a v37.... Remove seat base, 2 clips that slide forward to release it the it lifts straight out Fold down rear seat (pull in from boot) The side bolster of the rear seat is not connected to the middle parts that fold. To remove unbolt at the bottom bolt then push it up off the top hook Then there is a plastic surround behind the seat back, 2 pop out clips, 2 bastard clips, some swearing at it is out Pop the rear seat latch surround off Remove door surround lower trim then side trim  Remove c pillar trim - 4 clips, pull inwards not forwards Remove metal brace - 5 bolts 1 nut Then you have got to the rear strut top...what a pain!
    • If you really want squish back, you can have it put on the piston (at least to some extent).
    • Impressive. He's very very smooth.
    • What does IPDM stand for ?
×
×
  • Create New...