Jump to content
SAU Community

Recommended Posts

1. is there a difference between the traction control and the SLIP light that comes on?

2. does traction control also work if you brake too hard or is that abs?

3. read some things but tired and cant remember things well. does traction control work in wet weather? coz i spun out and the slip light didnt come on even though i had tcs on.

Link to comment
https://www.sau.com.au/forums/topic/241871-r34-traction-controlslip/
Share on other sites

1. When the slip light comes on, your traction control is working. The main thing it does is over ride your throttle. In other words it closes the butterfly and basically cuts power to the engine

2. Thats not traction control, thats ABS

3. Yes, traction control does work in wet weather. If your car is in a spin, there is not much traction control can do to get you out of it. I'm assuming you slammed on brakes or something while you were spinning. Traction control can do nothing then.

agreed with what ryan said

traction control DOES NOT work or do ne hting if ur car is in a spin

tho if it's dry road or wet road in a straight line the tcs does work stops ur tyres from spinnin too much:)

leo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...