Jump to content
SAU Community

Recommended Posts

I want to buy a alloy radiator

Problem is i need a r32 radiator as that is the car and i need the mounts to line up but will the hoses line up on a rb25det?

Basically i need one but need to know if i can use a r32 one on a rb25det engine or if i need different hoses etc.

ALso what kind of Thermo fans are you all using. I really need to sort this over heating issues out bare in mind i am in Darwin and the temps up here are around 36 most days with around 80% humidity. it gets hot and my engine hit 105degrees alot.

Any suggestions would be great

Link to comment
https://www.sau.com.au/forums/topic/241900-cooling-issues/
Share on other sites

the RB series radiators outlets are the same if not very similar

i would get the R32 one and if you have an issue with hoses make something up to fit (its a very simple job)

ill see if i can find the fans and take a pic for you

Link to comment
https://www.sau.com.au/forums/topic/241900-cooling-issues/#findComment-4220699
Share on other sites

yeah those fans are nice, i would love to install some but my car stays cool enough,

as your in darwin aswell, i would suggest your get a 19row oil cooler, it will drop your water temp 10 degrees :)

so that and a alloy radiator should drop your water temp down below 85

Link to comment
https://www.sau.com.au/forums/topic/241900-cooling-issues/#findComment-4221053
Share on other sites

If your interested I brought a set of el i think ford fans same twin thermo setup but couldnt get em to fit in my gtr with minor trimming they would have fit a 32 radiator okay just wouldnt clear the power steering

Am in darwin and could probly yank the radiator too if ya were keen to check one out as motor is coming out anyway

In darwin so pm if ya wanna look reckon there was an alloy 32 radiator on boostcruising Darwin section recently it mighta sold already though

Link to comment
https://www.sau.com.au/forums/topic/241900-cooling-issues/#findComment-4221111
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah its bad eh. Ey! Watch your mouth. Yep, spot on. The rear's are always gone too though from brake checking. I had them perilously close to a tree that we had taken down. I think the tree peeps may have taken it. Either for a trophy, or accidentally.  
    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
×
×
  • Create New...