Jump to content
SAU Community

R33 Stuff

SLY-L20
 Share

Recommended Posts

SLY-L20 Community Regular

SLY-L20

Posted
Posted (edited)

ok just gotta 33 and there are a few things i need to get rid of

wing with brand new brake like ($300 was paid for the tail light genuine nissan) $200

Power FC for RB25 $700ono

GT42R turbo (its a f**king monster) rated at 1200hp $1000 ono

Drift D1 seat for drivers side on R33 rail as new condition $300

i dont get on the net much these days so sms or phone me on 0413595838 for anything urgent

can send pics of anything to you via sms as i can only use the internet at work and cant upload pics

cheers

Edited by SLY-L20
Link to comment
https://www.sau.com.au/forums/topic/242274-r33-stuff/
Share on other sites
SLY-L20 Community Regular

SLY-L20

Posted
  • Author
Posted

sorry no hand controler hence why i bit cheaper

it was tuned on stock 33 with zorst filter and front mount and made 202rwkw on 12psi

will call you shortly i was on the work phone when you called and tried calling the number that called me but wouldnt work....

Link to comment
https://www.sau.com.au/forums/topic/242274-r33-stuff/#findComment-4225569
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      New R32 owner soon

      By joshuaho96 路 Posted

      Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man 路 Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 馃槩 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man 路 Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin 路 Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan 路 Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
脳
脳
  • Create New...