Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

in all seriousness i wouldnt bother spending money on the gtst. i have owned one series 2 with auto trans and it just doesnt do it for me no matter how much money you put into it. if you are still into the modding worldgame then get the gtr. you get the rb26, the twins, the awd, fatter ass and the badge. ive gone the opposite and have bought and evo, its a really fast, reliable car with nearly all the features of the gtr but not as hight of tuning potential as gtr.

although ive only had the car for a day im already thinking that ive made the wrong choice and ill be trading/buying a v35 in next couple days.

Too get your GTSt up to a good level (what I'd consider a good level at-least) you're going to be looking at:

Manual Conversion - $1500 (+ HD clutch etc - $1000)

New ECU - $1500

Fuel Pump + Injectors - $1000

HKS GT-RS (or similar) $4000 (taking into account the current dollar)

Tuning/Workshop time - $500-2000 (depends on how much you do yourself)

Boost Controller - $500

Exhaust - $1000

Suspension - $2000

Wheels - $2000 + tyres

That's almost the cost of buying somebody else's GTSt that's already modded. But obviously it depends on what you have done already.

Personally if I were in the same boat I'd get a 33GTR, amazingly I am pretty much in the same boat, except I'm holding off for a couple of years and I'll be buying a 34GTR instead :).

Nissan didnt make the GTR for no reason

unless your missus drives it alot

then sell the GTST then get a GTR

GTR with light mods and a tune will get 300awhp

Light mods being boost and a tune lol

It really depends on what YOU want to do with the car. You can make your auto handle the power (search for MV Automatics).

But it's each to their own, I like the idea of a GTR but I know I will miss the pure sliding fun.. if I did get a GTR it would be a daily and I'd keep my GTSt for super happy sliding fun time :(

yea def sell the GTST and fork out for a GTR :( have owned both gtst and gtr and def the GTR just for the wank factor + basic mods to the gtr will give u plenty of fun for a while just my opinion but at the end of the day its ur choice

Can you afford to buy a gtr and do work to it? If thats the case get the gtr, otherwise you can still get gts-ts pretty damn quik, stik a rb30 under it, thatll smooth out the big injectors and cams :) heaps of torque off boost aswell..

After the amount I've spent on a totally stock car to do up everything outside of the engine.. i think around the 16-17 mark, could be more you lose track of all the little bits you spend.. id say its much easier to buy one already modded and keep some money left over for a rainy day

I dislike how people refer to gtst's and gtr's in terms of how economical it is to get power out of the respective vehicles.. it should be about the driving experience and what YOU like/prefer.

Not everyone buys a gtst because they can't afford a gtr or it's maintenance/modification costs. Some people are purists and don't believe in 4wd for a "true" driving experience!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...