Jump to content
SAU Community

Recommended Posts

hey everyone have decided to drop an sr20 into the r32 so its time to sell all the powerplant that the rb20is.

RB20DET from a laurel (apparently slightly lower compression motors and different cams) 120000-130000Kms on this motor. comes with 550cc injectors, Z32 AFM RB25 turbo and a chipped ecu by Dr Drift. tuneable at mercury motorsports. turbosmart blow off valve will come complete with engine bay wiring harness back to computer.

Also has a exedy lightweight flywheel and a 6 month old exedy 5 puk brass button clutch. 5 speed manual gearbox which has a bit of a bearing noise in 5th but still going strong.

will sell the whole lot for $2500 or will seperate for the right prices.

call Ross on 0421 869 037

located northside of brisbane in ferny hills

will seperate if i have enough interest.

gearbox - $500

Exedy Lightweight Flywheel and 5 Puk Brass Button Clutch Combo - $700

engine and injectors and loom- $900 (loom is slightly modified to suit Z32 AFM Plug and Injector Plugs replaced with applicable plugs to suit injectors

turbo - $300

Z32 Air Flow Meter - $300

Dr Drift Chipped Computer tuned for Z32 AFM, 550cc RX7 injectors, 3" zorst, fmic, rb25 turbo at 14psi - $400

TurboSmart Atmo Bov - $100

Link to comment
https://www.sau.com.au/forums/topic/242802-rb20det-and-other-r32-gear/
Share on other sites

Im after some RB20 parts,

* turbo coolant line that goes around back of head.

*ECU temp sender, big yellow one

*turbo to mani nuts

*STD Injector plugs/ loom

*oil dip stick and tube

Im after some RB20 parts,

* turbo coolant line that goes around back of head.

*ECU temp sender, big yellow one

*turbo to mani nuts

*STD Injector plugs/ loom

*oil dip stick and tube

Dont have the standard Plugs anymore they went into the bin. you can have the rest for $900 and get a free RB20 as well!!

Bee*r Rev Limiter - $250

Just Carried out a compression test on the motor as i had the coil packs out so i got

1. 155psi

2. 155psi

3. 155psi

4. 148psi

5. 148psi

6. 150psi

so engine is in pretty good nic with only a very slight difference across all 6 cylinders. (battery started to die too)

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...