Jump to content
SAU Community

Qld: Shed Clean Out, All Parts Gotta Go!

nemesis2187
 Share

Recommended Posts

nemesis2187 Explorer

nemesis2187

Posted
Posted

alrighty guys, i got heaps of stuff that needs to go as i no longer need these parts.

heres the list so far, will get pics on request

RB25 head with 62,473 genuine km's, seen the car it came out of. Head comes complete with loom, AFM, igniter with ford falcon coil set up or if u want orginal coils can organise that instead of falcon coils, coilpack center cover, inlet manifold with all sensors and injectors, Genuine manual Mines ECU, rocker covers fully polished, and AFM no exhuast manifold but i have a RB20 turbo complete setup with lines and all which could be used with the 25 head - asking $800 for the the lot without the RB20 turbo and manifold or $900 all together

LOOMS-

RB20det redtop - $80

RB20det silvertop - $120

RB25det - $120

RB20DET silvertop manual ECU - $150

RB20DET redtop manual ECU - $100

RB30E manual ECU - $50

RB20DET silvertop turbo setup with all lines, banjo bolts, washers, manifold, elbow and wastegate actuator VGC $250

RB20DET silvertop turbo with lines and wastegate actuator only GC - $150

RB20DET silvertop inlet manifold with all sensors and injectors VGC - $80

RB20DET silvertop coilpack cover - $40

RB20DET silvertop cam cover - $20

RB20DET rocker covers - $40

RB25DET pistons, rods, crank and crank cradle (came out of the low k motor mentioned above) block was sold to a mate - $250 all items are like brand new

RB25DET alternator - $80

7MGTE auto ecu- $60

Custom Zub zero polished turbo, biggest TO4 compressor housing with a T3 flange (not sure of exhaust AR) comes with staniless steel manifold and garret wastegate with screamer pipe in good condition - $700 ono

RB20det manual gearbox - $400 ono

RB30E manual gearbox conversion out of R31 with tailshaft, cluch and brake pedals, slave cylinder, master cylinder, line that runs to slave, shifter, crossmember, clutch fork, thowout bearing, flywheel, clutch and pressure plate - $650

R31 S3 tail light center garnish and bottom tail light surrounds - $80

various BOV's $50 each

RB20/25det crossover pipe with plumback BOV - $50 each

RB20/25det rubber elbow that joins to compressor on turbo - $20 each

RB20 AFM's $60 each

RB20 and 25 coilpacks - $20 each or $110 for 6 with coil adaption plates

RB26 Twin 600hp Nismos complete with all lines banjo bolts, wahsers, all intake piping with rubbers, actuators, dump pipes, oxy sensors, and both manifolds. 1 of them in in mint conditon the other has a little of horizontal play, all fins on compressor wheels are mint - $1300

1984 toyota 4runner in good condition with a V6 commodore engine in it, mated up to a surf gearbox which is the same a supra box but with a transfercase, car has been mod plated, was registered but just ran out. Heads were just done on motor, various gagues oil, water temp, volt gauge, CB radio, kenwood cd player with 6x9's car was sanded back to bare metal and resprayed in acrylic yellow ( standard colour) no rust in it, side steps, Bull bar, 2 spot lights, auxilary tank. not much needed to get a legit roadworthy just needs two $5 axle seals, 2 front seats and a drivers side window winding mechanisim. Tough Fourbie chasing $4000 ono

2001 KTM 250SX New pistons and rings, new rear suspension, new rear pirelli tyre, new front shocks but one recently blew a seal, pro circuit expansion chamber and muffler. Very fast bike not for faint hearted $3800 ono also comes with different colour plastics and a rear fender with tail light

OR $7000 for both the fourbie and the dirt bike.

THATS ALL FOR NOW, WILL GET PICS ON REQUEST AND I WILL LIST MORE PARTS SOON!

THANX GUYS FOR TAKING THE TIME TO CHECK THE AD OUT

CALL ME PLEASE IF UR KEEN ON ANYTHING ON 0401366024 I DONT USE THE NET MUCH SO YEAH, PLEASE CALL

CHEERS,

IVAN.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...