Jump to content
SAU Community

Recommended Posts

hey guys, soon as id be trailering a skyline to trackdays thought i would post this question.

new P plate laws stop you from driving any v8, unless you have a certificate allowing you to due to special reson such as work, from what ive heard.

does any one know, or can anyone find out if i would legally be able to own a v8 as my tow car.

when i say v8 i dont meen like a sporty v8, i mean a bmw 535i or 540i with a weight of like 1600 and a power of 170kw or there abouts.

any ideas, theories would be great

Cheers

Gezza

Link to comment
https://www.sau.com.au/forums/topic/242812-p-plater-with-v8-tow-car/
Share on other sites

if u wanna drive a v8.. you gotta send vicroads a letter for an exemption..

Theres like 3 ways to get it..

1. your using it as a work vehicle..

2. you're going through hardship and the vehicle was passed down through ur family..

3. i forgot. ;]

lol 5 series bimmer as a tow car?

the laws may be nonsense, but its probably not worth the hassle trying to go down this path. not to mention a bmw as a tow car. have fun with the maintenance.

youre best going for a diesel, 6 cyl ute. it may be a bomb, but if youre really looking for a "tow car" and not a way to cheat the laws to get a bmw, a ute is a much better option.

For a dirty tow car, why not a dirty ford or commodore wagon - I navigated for two different guys who used one or the other, they are cheap cars, reasonably reliable, 6 cyl with -plenty of torque for towing, cheap to buy and repair if you need to (unlike a bmw, and lets face it, you will be spending all your spare cash on a track car), heaps of room for spare parts/tools, and when you get to the track - no one looks at the tow cars...

lol yeah a beamer would be a bit precious but its for my daily driver aswell, as wen i put my 33 on the track i am completly with out a car. that is why the nicer than usual tow car.

just contemplatig my nicer options, thanks guys.

they will exempt you for work purposes as stated.. is it you job? No, then they won't exempt you.. and yeah they will know you are using it as a daily.. which means you are trying to loop hole the law.. they won't do it

I had a subaru liberty with a surprising amount of torque for towing, I pulled a few trailers full of crap / cars etc up hills and things with no problems, and it was only a 2.2l manual, good car too, nice drive and never had any problems - I would consider another if I needed a tow car/daily

Exactly. You don't need a massive engine to tow. One of my mates used to tow a HQ race car with an E30 BMW 323i. Old 6 cylinder Falcodores will tow something well enough.

Diesels are exempt from the turbo restrictions, so you get an old 4WD or something as well.

And the 540i was meant to be "sporty". It's not meant to be a HSV competitor, but in BMW's lineup it would be akin to a V8 Calais.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...