Jump to content
SAU Community

R34 Gtt Stock Boost?

Nero_Tigre

By Nero_Tigre,
in Forced Induction Performance

 Share

Recommended Posts

silviaz Proficient

silviaz

Posted
Posted (edited)
3 hours ago, GTSBoy said:

This.

Shaft play is not "broken". Turbine in thousands of crumbs in your cat converter. That's broken.

It will explode suddenly and you will immediately lose all boost and any hope of ever making boost again.

It can happen today, it can happen tomorrow. It might take another 5 years. It can happen at 10 psi, at 12 psi, at 17 psi. Mine blew as it came on boost so it wouldn't have even spooled all the way up and was probably only making 5 psi at the instant it let go.

Yes. I drive it hard regularly. Most miles are done commuting, but it gets the arse hung out on every roundabout, every on ramp and no wanker in a Commodore is allowed to win at the lights.

Ah ok. I guess the solution here is a decat 😂

I kept hearing people saying those bits can end up in your engine as opposed to going out the exhaust?

 

@R31Nismoid i think you mentioned this on another thread?

Edited by silviaz
Link to comment
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted
34 minutes ago, silviaz said:

I kept hearing people saying those bits can end up in your engine as opposed to going out the exhaust?

On RB26 with ceramic twins, certainly. On single turbo RBs, almost certainly not. Very rare.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      R32 clutch master cylinder

      By BASHERnissan · Posted

      Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • MBS206
      Synthetic oil versus conventional oil

      By MBS206 · Posted

      Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • Kinkstaah
      Feedback on Carbonetics: R34 GTT cooling panel

      By Kinkstaah · Posted

      That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • PranK
      Synthetic oil versus conventional oil

      By PranK · Posted

      Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
    • GTSBoy
      Feedback on Carbonetics: R34 GTT cooling panel

      By GTSBoy · Posted

      Yes, well, one or the other. On R32 (which is the only thing I can look at personally) it's on the rad support panel. You have neither, and it will need to be on one or the other. I must say that the arrangement of holes perhaps looks more like it lives on the bonnet underside on the R34. The rad support panel doesn't look like the R32 one at all. A quick google shows....
×
×
  • Create New...