Rb25 Neo N/a Turbocharging

[tstg23r]

Hey everyone, I removed this RB25 neo NA from an R34 GT. I want to make it turbo and put it into my R32 4 door. I have all the bits sitting arround so i want to try do it cheaply. Its got 53 000kms on it, so first thought was maybe put a thicker head gasket on it and put the stock turbo set up from the r32 onto it, and run low boost. But then it would not cost too much to put an rb25 turbo bottom end into the non turbo block and make it a VVT rb25det. Im just wondering weather i would need to get pistons only , or do i need to get turbo pistons and rods from an rb25det?. i would also use the box from the NA r34 which looks like an RB20det gearbox. sitting arround i have a rb25 greddy copy plenum , rb26 injectors, car has hks exhaust and front mount. Any suggestions appreciated.

Cheers, Mark.

[The Dan]

I'm fairly sure the plenum won't bolt up to the Neo N/A cylinder head.

Just leave the bottom end together and run the normal 12-14psi from the stock turbo. You won't have issues, it will actually make more power.

[tstg23r]

I'm fairly sure the plenum won't bolt up to the Neo N/A cylinder head.

Just leave the bottom end together and run the normal 12-14psi from the stock turbo. You won't have issues, it will actually make more power.

cheers mate

, Bummer if the RB25DET GTR style plenum doesnt fit the RB25 neo N/A head!, Can anybody confirm this ?