Jump to content
SAU Community

Recommended Posts

Hey guys.

Just bought a set of 15" wheels for the drags to go on my 96 Gts-T. And they are not clearing the brakes (completely locked up tight on the calipers . Put on a set of roughly 5mm spacers in a hope it would fix it. Now it is soo close it isnt funny. The wheel will turn but in the process it is rubbing on the brake calipers (stockos). I have 3 weeks before our next Drag meet and i really need something working by then.

I would rather not grind calipers or the inside of the wheels :(

Any thoughts on how i might aleiate the problem. Whether a larger spacer would not be putting too much risk on the wheel or so on. As i said. I can get the wheel to turn (by hand) whilst it rubs so there cant be a lot holding it back.

Any suggestions would be great. I cant afford to not be prepared for the next meet as ive invited several of the V8 mates along and i dont want the Skyline coming 2nd best.

Luke

Edited by l_uk3y
Link to comment
https://www.sau.com.au/forums/topic/242904-wheel-fitment-issues/
Share on other sites

why would you go smaller than standard

sell them and buy a set of standard wheels

Have been told that they came off a skyline and have been fitted to a r32 and r33 in the past. And only have them for the Mt's.

Update to this. After taking a small amount of material off the calipers (nissan logo was fine. it was rubbing at the top of the caliper (as the red paint was rubbing off). Quick hit with the dremmel and they are fitting and currently sitting on the car. Ride quality is fine, as far as sensible driving around town they are fine. One hard launch has seen very minor chirp then business as normal. So all in all a good weekend out. Spacers + Grind = Fix

Luke

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...