Jump to content
SAU Community

Recommended Posts

The clutch install. We chose the the Nismo Super Coppermix Twin Plate (Competition Spec) because of its racing heritage and its acclaimed softer pedal feel compared to other twin plates. Although a strong single could have been built for around the same price, we decided that a stronger twin plate should be able to cope with a little more abuse for what the engine will eventually put out. Once the clutch was installed it took a little getting used to driving, with the main problem being that I didn't give enough revs. As the plate bites nice and hard it will stall the engine quite quickly. The lightened flywheel is also a welcome addition, as the reduced weight will help in the lower rev range, however the other often overlooked advantage is that the material chosen for the flywheel is crucial to the biting of the clutch plate, get these two materials wrong and your clutch will be working harder than it has to.

clutch4.jpg

clutch1.jpg

clutch2.jpg

clutch3.jpg

clutch5.gif

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

And it begins....

The engine is out and the block stripped down, with the clearances being checked and the machining being done. The parts will start to arrive soon and we can slowly piece together the car making sure everything is right for when it hits the track. Therefore the suspension will be tweaked and maybe even a half cage put in.

Here are few pics of the engine coming out.

EngineOut-1.jpg

EngineOut-2.jpg

EngineOut-3.jpg

EngineOut-4.jpg

EngineOut-5.jpg

EngineOut-6.jpg

EngineOut-7.jpg

EngineOut-8.jpg

EngineOut-9.jpg

EngineOut-10.jpg

EngineOut-11.jpg

We took the gearbox out to have a look at it since the last track day caused 3rd gear to crunch, I thought it might be a synchro problem, then we drained the box and heard a few "clunks" into the pan, picked up the magnetic drain plug and this is what we saw...

EngineOut-12.jpg

Looks like an excuse for a strengthened gearset.

  • 1 month later...

As I know a few people are keen on doing their own engine build, I thought I would post up the price of the different items required for the build. These are pretty much on par with what I have paid, however there will always be exceptions to the rule when it comes to preferred brands, specs and of course how much you want to actually change. As I have stated before this build is not designed for all out power, but rather a very reliable circuit orientated build.

ARP Head Studs - $150.00

ARP Main Studs - $375.00

CP Pistons (Custom Made 9.5:1) - $1,000.00

Nissan Gasket Kit - $200.00

ACL Race Series Main Bearings - $100.00

ACL Race Series Big End/Rod Bearings - $100.00

Tomei Head Gasket 1.2mm - $318.00

Tomei Valve Springs Type B - $430.00

Tomei Oil Gallery Orrifice - $6.00

Nissan N1 Oil Pump - $345.00

Nissan N1 Water Pump - $415.00

JUN Oil Pump Crank Collar - $175.00

GReddy Magnetic Oil Plug - $20.00

Spool Conrods - $695.00

Ross Harmonic Nexus Balancer - $540.00

Tial 38mm MVS Wastegate (x2) - $400.00

Full Race TS Exhaust Manifold - $2,200.00

Garrett GT35R (1.06/.70) TS Polished, V Band, T4 - $1,500.00

(or the BorgWarner S200SX 75 - 70 1.15AR, which is around $900)

Machining & Labour - $4,000.00

Catalytic Converter - $300.00

Engine Total $14,169.00

Obviously this does not include all of the parts already included like the fuel system, throttle body, plenum, braided lines, coil pack, etc. Which adds another 5k or so to the price tag. As you can see this is a pretty costly procedure so you will want to keep the car for a while or have very deep pockets.

  • 2 weeks later...
  • 3 months later...

Another update, after a very long wait for the custom CP Pistons to be made, with a CR of 9.5:1. The block machining can begin and the build put in full swing.

06082010246.jpg

06082010249.jpg

06082010252.jpg

06082010253.jpg

06082010254.jpg

06082010258.jpg

Only waiting on the complete Full Race turbo/manifold/wastegate set-up :)

  • 1 month later...

Going to leave it for the time being, if it does start to change colour or I think the heat is an issue then I'll pull it off and coat it. Same with the turbine housing.

  • 1 month later...
  • 3 weeks later...

I have been pretty slack updating this thread, so here are a few more pics.

Whilst the engine was getting built, I decided the engine bay could do with some fresh paint to match the rest of the cars cleanliness.

We are waiting on the High Energy Circuit Pro Sump to be built and then the engine will be put back into the car along with the freshly built gearbox.

engine%20block.jpg

paint01.jpg

paint02.jpg

paint03.jpg

paint04.jpg

paint05.jpg

Next on the list is the new intercooler piping, oil cooler and plumbing, and twin waste-gate/manifold piping.

Still deciding on a pod filter with a shroud, or a ARC panel filter set-up.

I'm finding it hard to justify the large price tag. Not to mention making a better entry feed than the stock one. I plan on adding another air feed through the bottom of the box too.

  • 1 month later...

Cheers mate :D

Well a picture tells a thousand words, so here are a few of the engine when we did the first dummy fit to see if the turbo and manifold were going to fit OK.

IMG_0285.jpg

IMG_0286.jpg

IMG_0288.jpg

And a few of the engine out putting everything on before it goes back in. I LOVE the manifold :wub:

IMG_1195.jpg

IMG_1196.jpg

IMG_1197.jpg

IMG_1203.jpg

Is Sabbadin Automotive is doing the mechinical work for you?

Cos the place in the background look familiar.

Top work with the car, love the colour.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
    • I like this page, better than that silly turbo kit   https://v8roadsters.com/product-category/engine-conversions/engine-conversion-lsx/engine-conversion-lsx-nc/  
    • That would be my Shoei helmet
×
×
  • Create New...