Jump to content
SAU Community

Recommended Posts

Hey guys i have been hearing some mixed opinions lately about the overdrive switch in my car and others.

I have heard that its good to leave overdrive on at all times and i have also heard its good leave overdrive off until you hit around 70km/h.

I have heard having it on all the time is good for fuel economy too although its not healthy for the gearbox?

Is there a definitive answer or is it just one of those "what you prefer" situations..

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235937
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Yer i can see where your coming from, but in my situation, which is not relatively hard driving around the local streets would it be best to have it on or off?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235961
Share on other sites

Definitely off mate and leave the power button off too; just normal mode.

going round residential roads and looking out for parked cars and street signs you wouldnt want it to jump into 4th gear when the 50km zone suddently has a hill or incline.

if you were in 4th you would have to put the foot down and you may be unlucky enough to hit the kickdown into 2nd; which is quite violent on the engine and gearbox.

I blew rocker arms off my sr20 s15 auto cos it drops down very quickly and the rev's shoot up

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235979
Share on other sites

Ah yer i have noticed that, put your foot down and then it just downshifts and revs sky rocket up.

Well thanks for your advice man, i will turn it off tomorrow and see how we go :D

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236235
Share on other sites

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Just to clarify (looking at your other post there sems to be room for misunderstanding) when i say leave it on i mean normally leave the overdrive in operation i.e. do not use the overdrive off switch except as above.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236653
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237763
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

correct.. thats what i would normally do. i normally just leave it on which means no lights on dash, except up hill and towing

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237819
Share on other sites

id love to see a comparison. between a full tank off petrol when the overdrive was not used and a full tank of petrol when the overdrive was left on. similar driving on both.

I have a feeling there may be a few suprises.

I would not sue overdrive unless I was going to stay at a constant speed above 80kmh for awhile

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238219
Share on other sites

Leave overdrive enabled (no light on the dash), let the computer do the work of selecting gears, learn to modulate the throttle pedal so you get good economy and make it kick down whenever you wish.

As stated above only time I'd turn it off is for engine braking/caning through twisties.

Overdrive = 4th gear/top gear

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238706
Share on other sites

while we are on the topic, what about manually down-gearing?

As in its in drive, slowing down for a corner and push it into 2nd at around 50ks...

Is this practise ok for auto-trannies?

I usually drive with the over-drive off during normal <70km/hr driving. If i get on the freeway/highway then i engage overdrive (or 4th gear). In a manual you dont go into 5th when doing 50km/hr do you? How would putting overdrive on (or not turning it off) cause less engine wear?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4239970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...