Jump to content
SAU Community

Recommended Posts

Hey guys i have been hearing some mixed opinions lately about the overdrive switch in my car and others.

I have heard that its good to leave overdrive on at all times and i have also heard its good leave overdrive off until you hit around 70km/h.

I have heard having it on all the time is good for fuel economy too although its not healthy for the gearbox?

Is there a definitive answer or is it just one of those "what you prefer" situations..

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235937
Share on other sites

Personally i never use 6th gear unless im on the freeway; 5th is the highest ill go on a highway.

Overdrive is great when you can keep a nice a smooth speed of over 60kph without having to slow down; etc comming home from work in traffic.

keep it off when you wanna weave through light traffic; feels great and much more responsive.

on the great ocean road; you would not turn on the overdrive.

Yer i can see where your coming from, but in my situation, which is not relatively hard driving around the local streets would it be best to have it on or off?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235961
Share on other sites

Definitely off mate and leave the power button off too; just normal mode.

going round residential roads and looking out for parked cars and street signs you wouldnt want it to jump into 4th gear when the 50km zone suddently has a hill or incline.

if you were in 4th you would have to put the foot down and you may be unlucky enough to hit the kickdown into 2nd; which is quite violent on the engine and gearbox.

I blew rocker arms off my sr20 s15 auto cos it drops down very quickly and the rev's shoot up

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4235979
Share on other sites

Ah yer i have noticed that, put your foot down and then it just downshifts and revs sky rocket up.

Well thanks for your advice man, i will turn it off tomorrow and see how we go :D

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236235
Share on other sites

Leave it on all the time. Save petrol, engine wear. Now that you know there is a kickdown switch you won't be surprised by what happens when you floor the pedal. You can develop a smooth driving style by managing the accelerator pedal to keep it in the highest possible gear and with practice you can make it go into 3rd or 2nd at will. The only time i would turn it off is if you are going down a steep hill while towing or if you are giving it hell through a winding stretch and you want to hold it in 3rd.

Just to clarify (looking at your other post there sems to be room for misunderstanding) when i say leave it on i mean normally leave the overdrive in operation i.e. do not use the overdrive off switch except as above.

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4236653
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237763
Share on other sites

ok back to confusion haha!

overdrive is off when the light on the dash says overdrive off

overdrive is on when the light on the dash is not displayed

So basically for local driving it is best to have overdrive on which means the button should be pushed in leaving no light on the dash!

Correct or..

correct.. thats what i would normally do. i normally just leave it on which means no lights on dash, except up hill and towing

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4237819
Share on other sites

id love to see a comparison. between a full tank off petrol when the overdrive was not used and a full tank of petrol when the overdrive was left on. similar driving on both.

I have a feeling there may be a few suprises.

I would not sue overdrive unless I was going to stay at a constant speed above 80kmh for awhile

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238219
Share on other sites

Leave overdrive enabled (no light on the dash), let the computer do the work of selecting gears, learn to modulate the throttle pedal so you get good economy and make it kick down whenever you wish.

As stated above only time I'd turn it off is for engine braking/caning through twisties.

Overdrive = 4th gear/top gear

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4238706
Share on other sites

while we are on the topic, what about manually down-gearing?

As in its in drive, slowing down for a corner and push it into 2nd at around 50ks...

Is this practise ok for auto-trannies?

I usually drive with the over-drive off during normal <70km/hr driving. If i get on the freeway/highway then i engage overdrive (or 4th gear). In a manual you dont go into 5th when doing 50km/hr do you? How would putting overdrive on (or not turning it off) cause less engine wear?

Link to comment
https://www.sau.com.au/forums/topic/242981-overdrive/#findComment-4239970
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Lucky pick up Best to find these things before something horrible happened to the yoke flange thingies I would hate to think what would happen if it dropped the tailshaft  Hopefully the holes are not flogged out in the yokes and it was just the bolts that got munted  As for the hand brake.....ouch, look like the disc got rather hot, and I assume smokey, I recall when I had a front caliper seize on the Commodore, there was lots of smoke and the disc was glowing cherry red when I was able to eventually stop and have a look, and stopping a big heavy car, going down a big hill with some rather high RPM down shifts and some hand brake action is something that makes you think hard about life
    • One of the things that never seemed right was the handbrake. Put in some nice new Project Mu shoes. We figured the rears were out, so why not. We're right there. My handbrake never worked well anyway. Well, this is them, 15km later. 67fdcf94-9763-4522-97a4-8f04b2ad0826.mp4 Keen eyes would note the difference in this picture too:   And this picture: Also, this was my Tailshaft bolts: 4ad3c7dd-51d0-4577-8e72-ba8bc82f6e87.mp4 It turns out my suspicions that one side of the handbrake cable was stretched all along were pretty accurate, as was my intuition that I didn't want to drop the tailshaft to swap them on jack stands and wasn't entirely sure about bolt torque. I have since bought the handbrake cables which have gone in. I'm very glad that I went to my mechanic friend who owns an alignment machine to get an alignment before the track day, because his eyes spotted these various levels of "WHAT THE f**k IS GOING ON HERE?". Turns out the alignment wasn't that bad, considering we changed the adjustable castor arms out for un-adjustable castor arms, and messed with the heights. Car drove pretty good with one side of the handbrake stuck on, unbleedable rear brakes, alignment screwy, and the tailshaft about to go flying and generally being a death trap waiting to happen! (I did have covid) (I maintain I adjusted the handbrake correctly, but movement caused shennanigans and/or I dislodged the spring on the problem side somewhat, or god knows what). G R E G G E D
    • Very interesting, im not sure how all those complications fit in to running a haltech instead of a stock ecu but I'm starting to think I'm a bit out of my league.
    • I just put 2 and 2 together. This is a Neo converted R32. The Neo ECU (in concert with the R34's AC controller) runs the AC quite differently to how the R32 ECU and AC controller do it. If you just drop it all in, it won't work. There is some tricky wiring required, including changing to the pressure switch that the Neo controllers want to see. I don't know what it is, because mine was done by a guru. It was a year or so after I did that transplant before he worked out what needed to be done.
    • Don't assume the AC relay signal from the ECU is +, some models including Stagea use an earth trigger.
×
×
  • Create New...