Jump to content
SAU Community

**cusco-10point Rollcage**

Antonjj
 Share

Recommended Posts

Antonjj Enthusiast

Antonjj

Posted
Posted

i have for sale a CUSCO 10-point rollcage for a bnr32 gtr. i bought this brand new while i was in japan, with plans of putting it in my drift car when i finished it but plans change and no time for project.

$1800ono

post-48873-1225687836_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/243079-cusco-10point-rollcage/
Share on other sites
femno Grand Master

femno

Posted
Posted

Just wondering what classifies it a being a 10-point cage?

Have seen others labelled 6-point with the same amount of parts etc.

Did you find out what material its made of yet?

[WLDCRD] Mentor

[WLDCRD]

Posted
Posted

its basically a 6 point but you got the attachments that go from the b pillar hoop to the a pillar legs which run alongside the doors and the bar that goes from the top right side of the b pillar loop to the bottom of the left of the rear arm.

And as far as i am aware its a safety 21 cage which i thought were all black and steel and the chromoly ones are the blue ones.

GTRBOS Mentor

GTRBOS

Posted
Posted

its basically a 6 point but you got the attachments that go from the b pillar hoop to the a pillar legs which run alongside the doors and the bar that goes from the top right side of the b pillar loop to the bottom of the left of the rear arm.

And as far as i am aware its a safety 21 cage which i thought were all black and steel and the chromoly ones are the blue ones.

your exacely right there mate, got to it b4 i did :cheers: , black ones are steel which are heavy and ofcourse the cheaper ones but the blue ones are the leightweight material cages which are the pricey ones, i think this is abit pricey what his asking but hey its his cage, you said you will get rid of it for 1k and my offer was $650 which i think is a pretty decent offer,

cheers mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      This might be true if you live in NZ but I can't see how this could be true for us locals here.  I've found the customer support for Haltech to be absolutely amazing. I've turned up to Haltech and spent entire days with their tech support guys, they've even helped me with wiring dramas that had nothing to do with their products.  They have the best customer support of any company I've dealt with, I can't imagine how my experiences with them could possibly be any better.
    • MBS206
      How "plug and play" is the Haltech Pro for R33 GTST

      By MBS206 · Posted

      If you want to do a single throttle body conversion easily, you won't need to pull anything apart. Take the linkage from your throttle off the linkage controlling the ITBs. Now open the ITBs wide open, and lock the linkages in said position. Now add a single throttle body onto the front of your inlet plenum. No it's not ideal for the last nth of a kw, but it'll be a lot better than what you're already trying to do...   PS, ITBs can be so damn hard to tune from, because roughly 20% movement in a throttle body equates to a change in roughly 80% of its flow (Hence power). When you add up the flow limitations of those small throttle bodys, it is a LOT higher than that of a single large throttle. Hence, TPS is very very sensitive with them, and you do a LOT of work with sensor fusion, and some Maths behind the scenes to make those blends nice, and be smooth.
    • MBS206
      How "plug and play" is the Haltech Pro for R33 GTST

      By MBS206 · Posted

      Yep, when Haltech purchased Adaptronic, and all of the Adaptronic staff, including Andy went with it, it took Haltech to the next level. Haltech wanted Adaptronic as they wanted things like Andy's fuel models, and some other IP, AND they wanted Andy too as he is brilliant! Andy has spoken about the incompatibilities between the old 1500 stuff vs Nexxus, and it totally makes sense. It's not JUST software that is different, there is huge changes in the underlying hardware too. It's why Haltech has had soooo many changes in the last couple of years, in terms of Hardware, and Software, and why it has become so damn Amazing. Why do you think guys like Rob Dahm with his quad rotor, went from running Adaptronic's to running Haltechs? Andy. Pretty much, Haltech these days, is Adaptronic, but with more funds behind it, and more staff, and hence Andy's visions, and visions of other people that he helps shape their great visions, into amazing new products. All the new Nexxus gear, whole new software for it, new and better dashboards, the apps that will run on headunits and NOT be slow to respond! I understand people being burnt in the past, but if you're ragging on a company, about products and issues from many years ago, it's more a reflection on yourself, not looking or keeping up with new stuff. In which case, those people should be going back to PowerFC and Nistunes as the ECU's to rave on about...
    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      Right, but I thought the problem has been for a while now that even if you know manifold pressure + throttle position you still have non-linearity and aliasing issues vs actual engine load? One way I can see things simplifying is going DBW, then all air going into the engine is represented by the throttle position. As opposed to a random bimetallic strip vaguely linked to engine temperature opening and closing a shutter or some random power steering air valve suddenly allowing a bunch of bypass air. But the same throttle position/RPM at ~atmospheric MAP in different gears is not guaranteed to be same engine load? Honestly, ITBs are of such dubious value IMO. I don't know why these things are hyped up so much. The main benefit as far as I can tell is you reduce the likelihood of cross-cylinder EGR scavenging with significant cam overlap at idle. I would absolutely run speed density and be done with it if not for this fairly esoteric control problem.
    • PotatoCake
      Alarm/immobiliser recomendations for an R33

      By PotatoCake · Posted

      Hah dont worry, my adult brain has this conversation every single day. Dont waste your money, invest more of it into shares, pay down the mortgage. Then the bedtime insta doom scrolling begins and after being bombarded with gtr's my mind is set: im definitely getting one! I have the current model mx5 as the weekender, but i just miss my boost and literally like your username, the sututu's that come with it. I remember with my 2nd supra, as it had twins and vvti, they used to spool real early, like 1,500rpm so you could just be a spooly boy all day long. Some people say they get over it after a while, not me tho. 
×
×
  • Create New...