Jump to content
SAU Community

**cusco-10point Rollcage**


Recommended Posts

its basically a 6 point but you got the attachments that go from the b pillar hoop to the a pillar legs which run alongside the doors and the bar that goes from the top right side of the b pillar loop to the bottom of the left of the rear arm.

And as far as i am aware its a safety 21 cage which i thought were all black and steel and the chromoly ones are the blue ones.

Link to comment
Share on other sites

its basically a 6 point but you got the attachments that go from the b pillar hoop to the a pillar legs which run alongside the doors and the bar that goes from the top right side of the b pillar loop to the bottom of the left of the rear arm.

And as far as i am aware its a safety 21 cage which i thought were all black and steel and the chromoly ones are the blue ones.

your exacely right there mate, got to it b4 i did :cheers: , black ones are steel which are heavy and ofcourse the cheaper ones but the blue ones are the leightweight material cages which are the pricey ones, i think this is abit pricey what his asking but hey its his cage, you said you will get rid of it for 1k and my offer was $650 which i think is a pretty decent offer,

cheers mate

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • What's an ARM? Have you checked fuel pressure?
    • After 4 years, checking if anyone has started/kept playing this. I still do on a fairly regular basis. If you do, let me know and I will add you to my friends list.
    • How did I miss this. Congratulations!  What a serendipitous turn of events.
    • Yes, I've been thinking about how to fabricate something. Either how OP did it with an alloy sheet or more complicated. Because of the CD shifter protrusion I think I will need to build a raised aluminum box to clear, then I would reutilize the same OE seal just shifted back. When I went on my test drive I popped open the EWG and exhaust just filled the cabin, so it will need to be closed up.
    • Car is struggling to rev from idle when you accelerate normally to spirited, But it will get past 1000ish rpm if you feather it, and then is fine so long as the revs don’t drop again. Idles fine. Plugs come out wet as after a few min.  Things changed are: CAS, ARM and fuel reg from a engine that was confirmed working 2 years ago Injectors have been reconditioned  ECU has no codes Where to from here? Video of the issue can be seen here  
×
×
  • Create New...