Jump to content
SAU Community

Will This Be A One Of A Kind?

rx07fd

By rx07fd,
in General Automotive Discussion

 Share

Recommended Posts

rx07fd Explorer

rx07fd

Posted
Posted

Hey guys,

Has anyone in AUS done an engine conversion of an RB26 R34 V SPEC II NUR engine into a R33 GTR????

I'm considering doing this as i can get my hands on the NUR engine.

after completing the conversion what do you think the car will be worth???

this is a list of mods that i will also be doing to the car if it goes ahead as i have alot of the parts already and or can get a hold of them.

HKS GT-SS Twin Turbos!!

MEGURO Original Computer ROM

BREMBO F40 340 6pot and 322 2pot Brake system!!

OHLINS Suspentions!!

Tomei Oilpan buffel plate

Tomei Metal Head Gasket set

HKS GT-SS Turbo kit

NISMO Sage Tank

NISMO 600cc Fuel Injector

NISMO big capacity Fuel Pump

ATTD Tukada original Oil catch tank

Engine Block Water hole expand

NGK Racing Plug No,8

MEGURO Mainetance Original CPU

(running and setting)

Exhaust;

Mines Silent VX Taitanium Pro

Mines Front Pipe

Mines Super catalyser

Tomei Turbo Outlet

NISMO Intercooler

TRUST Intercooler piping kit

Intakepipe twin air division modification

Exhaust manihold wide modification

Cooling;

BLITZ Racing radiator LMC

HKS Oil cooler

HKS Lowtemp thermostat

SAMCO radiator hose

Garage DEEFEND GT cooling panel

Suspention;

CUSCO Front upper arm

CUSCO Tention rod

NISMO stabiliser

NISMO Rear upper arm link(Front&Rear)

NISMO Rear reinforcemnt A-arm

NISMO Rear member brasekit

NISMO member spacer

Drive;

NISMO Twin Plate clutch G-max Spec2

Body reinforcement;

Do-Luck Rear cross bar

DO-Luck GACHIRI Support

NISMO Underfloor reinforcebar rear

Door section spot weld increase

Breke;

Front BREMBO F40 brake system 340 2-piece brake rotor

Rear BREMO 2 pod brake system 322 rotor

Project mu Type-NR Brake pad

Stainless Mesh Brake horse

NISMO Mater cylinder stopper

Electric;

Ortaneter exchange for new

OPPTIMA Yellow top dry battery

HKS EVC3

Interior;

R34GT-R Front seats(Driver and passenger)

SUPERIOR CARBON look Seat cover(Front and rear)

SUPPERIOR CARBON Center panel

SUPPERIOR CARBON Door panel

Dials;

NISMO 240km with monitor dash(for 400R limited)

With HKS CAMP sytem

Exterior;

ARC rear wing Magic Wing downforce type

Final Motion Front Lip spoiler

(with R33 standard lip spoiler)

Wheel;

Volk Racing LE37 17 inc 9.5J

Link to comment
https://www.sau.com.au/forums/topic/243281-will-this-be-a-one-of-a-kind/
Share on other sites
Johnny Veteran

Johnny

Posted
Posted

those brand new n1 engines are like 11-13k for the long motor; add the extras from your current engine + new turbos and its not a bad deal; sell your long motor too.

If my engine goes; thats what im doing, not gonna rebuild just a brand new rb26 from nissan.....like what beer baron did.

rx07fd Explorer

rx07fd

Posted
  • Author
Posted
those brand new n1 engines are like 11-13k for the long motor; add the extras from your current engine + new turbos and its not a bad deal; sell your long motor too.

If my engine goes; thats what im doing, not gonna rebuild just a brand new rb26 from nissan.....like what beer baron did.

i'll be keepin the motor from the 33 cause i'll always have somthing else to build when i'm done with this project.

my misses has an s13 so i might build her a car after i've done this one. gotta wait till she has her blacks tho.

i'll be able to get the nur n1 motor from the 34 for about 6 k cause it was in a smash and was written off in japan and the motor also needs a rebuild cause the idiot turned it into a dunka dunka. it's at my mates garage in nagoya.

it was starved of oil and the radiator was as dry as a hooker at the end of her shift.

the bloke who owned it obviously didn't car about his car!!! his loss my gain!!!!

so i need my rx7 sold so i can start on the 33.

the rx7 is on carsales.com and the rego numebr is rx07fd.... the vehicle id number is 6214212.

ask ur mates if they are interested cause i really want to get started on this now....

thanks guys

Duncan1 Rising Star

Duncan1

Posted
Posted

Sounds like it would be an absolute machine mate, if your seeking more inspiration go to gtr.co.uk and have a look @some of the 33 gtr's for sale on that forum, there are some insane cars there!!!!! especially a white one with 1000hp... Im not the biggest 33 fan, but that car is something very special....

seraphyn_r33 Proficient

seraphyn_r33

Posted
Posted

i have enough trouble saving enough money to buy a chinese turbo, and thats the list you "have lying around" and "can get a hold of?" lucky bastard :D

car will be a monster when its finished, although its only worth what someone else wants to pay for it, and youd be nuts (or an idiot) (or both) to sell it especially the way the market is at the moment

that titanium system alone would probably be worth more than what i paid for my car hahah

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      And 90% of the time those people turn out to be wrong anyway. But they still treat themselves as a victim...
    • r32-25t
      R33 fuel setup

      By r32-25t · Posted

      I used the radium thing, makes the whole parallel assembly a lot more compact compared to any other way of doing it 
    • TurboTapin
      R33 fuel setup

      By TurboTapin · Posted

      Racetronix also sells those ethanol content sensor bypass blocks. Adapter, Flex-Fuel E85 Sensor High-Flow Bypass, In-line No Sensor (ADF-FLEX-NS): Adapters - Flex Fuel | Racetronix Ethanol content sensor are originally designed to be on the feed line. These bypass blocks are meant to be ran in the feed line and not return. The continental ethanol content sensors have a 3/8" ID and not 5/16". This is why they are ran on the return line directly in conjunction with a low threshold sampling value VS in the feed with one of these blocks.    Haha we think alike, I used both original feed/return for 8AN feed, and one of the Hicas lines as a 6AN return. I also capped off and left the other Hicas line as a spare. 
    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
×
×
  • Create New...