Jump to content
SAU Community

Recommended Posts

It was just the thing my gearbox needed.

I was already using a PENZOIL synthetic gearbox oil but changing from 1st to second fast would still cause a slight crunch.

with this oil it works great.

Just remember one thing though.. Once you put Synthetic oil in your gearbox, You CANNOT go back to an organic oil.

FLY-SKY..

Maybe what that means is that it is not suitable for use IN the rear DIFF and to use it only for gearbox.

hey guys any one know anything bout gear boxes??

cause yesterday i put a 2nd hand box in and now when i give it abit of revs the car feels shakey, feels like its the tail shaft or mayb the fly wheel... or does anyone think its the actual box itself?? its second hand i wouldnt know if anythings wrong with it... help would be greatly appreciated, thanks

did you use your original flywheel? the tail shaft would be hard to put in wrong because of the spline on the end, and the gear box would work (my guess) if the internals weren't lined up as they should be!!

sounds like clutch plate/fly wheel issue IMOH

I don't know if anyone's tried this, but I found that adding oil stabiliser (Lucas or Morley's) to my gearbox improved the action a good deal.

Despit my box having been re-built (due to slow undiagnosed oil leek, not thrashing) it was still a bit notchy. I decided to try oil stabiliser firstly before going to the expense of using Redline.

The oil stabiliser label says very worn boxes need 40%/normal oil mix. I tried this firstly and found it too difficult to shift when the box was cold. I re-mixed the formula to 30% and it was much better, but still a bit stiff for the first couple of shifts (I am mixing it with Castrol VMX80). Probably a mix of 20% would be ideal, but I'm leaving it as is cos it feels very smooth once it's warm.

It only costs about $19.00 for a litre, and you only need about half that.

Anyone got any comments on the rights or wrongs of doing this? I mentioned it to my mechanic (Gavin Wood, Autotech) and he had nothing against it.

Lucas is just an oil thickener really. I didnt think it'd do much for shifting. Also lucas causes real bad foaming from some tests i've seen, so I personally wouldnt recommend it.. But hey if it works for you..

Originally posted by Timmy G

you cannot go back to organic oil because synthetic is so good and feels better? or it'll physically damage your box?

I mean you can't go back because the REDLINE synthetic oil leaves a coat of film (like a coat of oil) in the gearbox and I've been told that you can't mix organic oil back in to it or you'll get CLUMPS of crap in the gear box oil.

Redline oil costs $25 a litre.

The R32 GTST gearbox takes 2.8L

I bought the large 4 litre thing for $100 and have about a litre left.

When you consider that you probably spend at least $50 every 5000kms and never change your gearbox oil until you feel a problem, it's a wise investment.

  • 2 weeks later...
Originally posted by Busky2k

Lucas is just an oil thickener really. I didnt think it'd do much for shifting. Also lucas causes real bad foaming from some tests i've seen, so I personally wouldnt recommend it.. But hey if it works for you..

True - Lucas and other stabilisers are oil thickeners (or certainly appear to be even though Lucas claim on the website that their stabiliser doesn't alter VI), but Redline Lightweight Shockproof is simply a thicker oil (80w120). There is nothing exclusively esoteric about it, and it is very expensive.

I can't recall the VI for Lucas' stabiliser, but you could beef up a 75w90 synthetic with it to about a 120 oil simply by doing a few sums - or do what I did and just follow Lucas' instructions for a 20% concentration.

It'll still mean you get all the protection and longevity of the synthetic and at a fraction of the cost of the Redline.

Shell Helix 75/90 is a fully synthetic and is 'water cracked' so it's cheaper - about half the price of Castrol synthetic. It's probably a good oil but might not have quite the drain interval of, say, Castrol.

As I said, my gearbox was still a bit notchy after the re-build, but is now so smoooooth, and I think it cost me about $37 for both the synthetic and the oil stabiliser.

I don't know about the foaming issue Busky mentioned, but in the end it is the quality of the shift which is one of the main indicators of how a gearbox oil is working.

Lucas is frequently used in competition.

I'll be posting a new thread shortly with independant analysis of various oils in use (as soon as I find where I put it) which also shows that you can't believe didly squat about oil company claims concerning their products.

I'm not suggesting Redline isn't a good oil, just questioning whether we need to spend all that money for non-competition use.

  • 1 month later...
Originally posted by BuzLightyear

I don't know if anyone's tried this, but I found that adding oil stabiliser (Lucas or Morley's) to my gearbox improved the action a good deal.

Despit my box having been re-built (due to slow undiagnosed oil leek, not thrashing) it was still a bit notchy. I decided to try oil stabiliser firstly before going to the expense of using Redline.

The oil stabiliser label says very worn boxes need 40%/normal oil mix. I tried this firstly and found it too difficult to shift when the box was cold. I re-mixed the formula to 30% and it was much better, but still a bit stiff for the first couple of shifts (I am mixing it with Castrol VMX80). Probably a mix of 20% would be ideal, but I'm leaving it as is cos it feels very smooth once it's warm.

It only costs about $19.00 for a litre, and you only need about half that.

Anyone got any comments on the rights or wrongs of doing this? I mentioned it to my mechanic (Gavin Wood, Autotech) and he had nothing against it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
    • Doing a refresh of my 33 and can see a few websites stating they sell the entire main carpet for our cars, but they all have generic photos which is fine, i understand they are custom made to order.  Just seeing if anyone has got it done or had any experience with this, as i would only want to do it if the fit and finish was as good as oem https://carmatsdirect.com.au/products/moulded-carpet-or-vinyl-for-nissan-skyline-r33-1993-1998-coupe https://knoxautocarpets.com.au/moulded-carpets/nissan/skyline/skyline-r-33-1993-1998/
×
×
  • Create New...