Jump to content
SAU Community

Recommended Posts

hay guys buying a 180sx soon importing it but afew poeple are saying? get one already here?

i belive that if i import one i can pay same price in getting one here but in better nik =)

i dont mind waiting just want a good clean car +)

What you guys THINK????

whats the way to go?

Dragon18, it's up to you really

In most cases you'll save $$$ by importing, so yes, you'll probably be able to afford one in better nick or a newer model or whatever, than if you bought from a dealer here.

The downside is you're relying on someone elses opinion/inspection of the car, so make sure you use a trustworthy importer :D

I would go check out a few dealers, go look at a few private sales, and also join a mailing list like prestige motorsports (if you're not already on it) which shows you examples of cars in Jap and their condition/prices.

Compare what you can get for your money and then decide which way you'd prefer to go...

Personally I'd import :uh-huh:

Down side of importing is the wait.......... tell me about it .. 5 days to go before my ship comes in....... ahhhhh it seems like I've been waiting for years. Oh well - it'll be worth it !!

BF

hehe yeah the waits a killer.. luckily when dealing with Mark from centreline everything ran perfectly on time and was scheduled to get shipped to my door 5 days early.

it was meant to be here on friday in which i got a call from the trucking company telling me there had been a delay and that it wont be here til monday... which was when it was meant to be here anyway hehe

importing is the only way to go providing you can find a decent importer... only 2 i would suggest is Mark from Centreline Australia and Craig from J-Spec

Like the others have said, the wait is the most annoying part. But i think it is well worth it. Even though you can't inspect the cars yourself before they are imported, they seem to be in much better condition than the ones here.

I got my 180sx last year, very good condition and very happy with it.

at the end of the day if your up to save a buck then your probably better off finding a reliable importer. of course the risks involved with this option include:

a) does the importer carry warranty? in most cases no.

B) can you trust the importer with their auction reports and car details? if you've seen a jap auction report before they are quite detailed and the auction houses carry heavy fines if misleading information is given by the seller.

c) can you wait for your ship to come in, customs to clear and compliancing work to be done? about 10 weeks from date of purchase.

d) depending on importer (as some may do this all for you) can you be bothered with dealing with customs, compliance and registration?

when buying from a dealer its obvious there is a buck to be made - but hey, everyones gotta make a living and your usually paying for convenience anyways! you'll find different import yards have different profit margins and quality of cars may vary aswell. the best thing about car yards are you can touch, feel, smell and drive the car your going to buy.

so i guess it comes down with what you feel most comfortable with? but i reckon you look at both options and your decision should be based on the car that comes up on offer rather than the source it comes from.

my R34 GTT is coming very shortly....Richard @ Edge Imports organised everything, i just have to drive it home....currently it's at the compliance stage and everything seems to be running like clockwork.

Edge is also importing a friend of mine's R33 GTSt shortly after....

I have imported a few cars over the years from the Jap auctions and my buyer gives dead accurate body reports.

When the vehicles arrive, I invariably have to fix brakes, usually a clutch, sometimes repair a noisy diff or a stuffed syncro and give them a good tune.

The trouble is, no matter how good the report and/or the buyer , they can't DRIVE them enough to pick up some of these problems.

Sure, buy from Japan but unless you are or have a good friend who's a mechanic, any saving may be gone.

You don't hear too much about the bad cars from Japan that someone has imported cos no one likes to admit they bought a lemon.

My 2c

Ken

Depends that age 180sx, early model ones you maybe better buying here cause after all the shipping and taxes and complience you dont save all that much. But if you want a late one like 96 model a lot more money can be saved.

eg a early 180sx all the taxes , compliance etc maybe 50% of the cost, a 96 model you may find taxes shipping etc maybe only 30% of the cost.

E

its simple

if what you want is here, buy it. if not import....

when i was deciding to import or buy locally i wanted a modified car... which dont really exist at dealers so i imported. from experience if you want a standard car you can easily get one already landed. especially with 180s as the jap market is still keen on them and so are more expensive then say silvias or R32s...

There are risks and benefits either way you go, just make sure if you import one that you can get a guantee on the quality of the vehicle matching what you are told, and there is a good report on the condition of the car.

Also: E-MAIL me bout those PM's on alarm etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...