Jump to content
SAU Community

Recommended Posts

Hi guys.

I've got a bit of an issue with my boost.

I have a '99 S2 Stagea with 61000kms on it - and stock apart from a turbo timer.

It appears that I get 7lb of boost instead of the stock 5lb right from about 2500rpm - no complaints there, but after about 5 mins of driving it won't go over 5lb boost and is dropping back to 4lb boost at 5000rpm and feels 'lame' to drive and slow to build boost.

Now the funny thing, if I pull over and turn off engine and restart I get 7lbs boost again and is 'snappy' to drive for about 5 mins.

I've tested this quite a few times - the ignition must be turned off and not just letting the motor idle down and I get back the 7lb boost again.

First I thought it may be the cheap(looking) boost gauge so I rigged up another but they both read the same.

So I've been told(by local mechanics) it's

1) turbo is stuffed

2) fuel pump on it's way out

3) ECU playing up

Any ideas would be appricated

Link to comment
https://www.sau.com.au/forums/topic/243682-boost-issues/
Share on other sites

i wouldn't have said any of those things. i'd be looking at the factory boost solinoid. it may be on it way out and playing up. or it already has the 'high' boost mod done on it, where you ground out one of the wires, and the grounded wire hasn't got a good ground connection.

Link to comment
https://www.sau.com.au/forums/topic/243682-boost-issues/#findComment-4246403
Share on other sites

I've had a look at the boost solinoid and all appears to be stock, no extra wire/s and all hoses look to be in stock position but I'll disconnect it and test it a bit later.

But why do I loose boost at higher rpms - drops down to 4lbs?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/243682-boost-issues/#findComment-4246508
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting. Some of them were tight to lol
    • That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
×
×
  • Create New...