Jump to content
SAU Community

Recommended Posts

I am doing this for my friends.

He is going over 200KW on hisR34 GTT now and so he need to chnage his AFM to Z32.

MY question is:

1. Does anyone know the 5 wire on Z32 AFM. I know it have 5 wire but i don't know what it means.

2. R34 GTT stock AFM has only 3 wire, so therefore he is BIG LOST NOW..... PLS HELP HIM WITH THIS.

3. He has an Power FC but he don't have a hand controller. However on the hand controller, It does show a Z32 AFM option... because he don't hand a hand controller, can he just put in the Z32 AFM on to his R34GTT without changing his power FC system.

Thanks alot if anyone can help him out.

Thanks

Calvin

Link to comment
https://www.sau.com.au/forums/topic/24386-z32-wiring-systemhelp/
Share on other sites

Do you need another tune after putting the Z32AFM on?

I havent checked out the powerFC yet so I havent seen the z32afm option - is it near the optional boost controler option (what we all had to turn off after installing the AFM).

Can any trained monkey attempt this, or should request help?

BTW, thanks Phil

Mark

yes, it's recommanded..because Z32 AFM has different vots resolution compares to stock R33, alougth they are same 80mm..

when I play with commander, I have Q45 AFM, and I switch between Z32 and Q45 (VH41) and the duty cycle and throttle response are different..

hope this help..

Originally posted by MRK25T

Do you need another tune after putting the Z32AFM on?

I havent checked out the powerFC yet so I havent seen the z32afm option - is it near the optional boost controler option (what we all had to turn off after installing the AFM).

Can any trained monkey attempt this, or should request help?

BTW, thanks Phil

Mark

It's not listed as a Z32.

Select:

Setting -> Airflow -> VG30.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 馃槀馃槀
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I鈥檇 get, where I鈥檇 mount the dash etc.  I鈥檓 happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I鈥檇 like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it鈥檚 not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
  • Create New...