Jump to content
SAU Community

Recommended Posts

Hi all,

I have a set of KYB model number 341287 front shockers that I am looking to replace my tired worn ones in my Series 2 4WD.

Problem is that when I took them out of the box and measured the length up against the originals, the KYB's were about 20-25mm longer.

Now this promts me to ask whether they are in fact R33 GTST or R33 GTR? the suppliers reassure me that they are for the R33 GTR according to KYB listing. I remember reading somewhere that the R33 GTST's are a bit longer.

I will also be fitting lowered Kings springs (R33 GTR) to work with the KYB shocks but am concerned about the shock travel characteristics with the lowered springs as they are already longer than original (springs 30mm-40mm lower + shocks are 20-25mm longer = 50-65mm less travel in shocks than they designed for). Will they bottom out?

Questions;-

1. Is the 341287 KYB the correct part number to use for the Stagea?

2. Also does anyone know of any alternatives readily available at a reasonable price?

Nissan Aust original are about $400/pair + 2 week wait Japan.

Bilstein's are about $590/pair (B46 2107 FR Bilstein Sport B6 R33GTR)

Thanks, do you know what the correct KYB part number is?

You won't get anything in oz, you will only get japanese domestic model KYB's that are made for Stagea's, or are you after the R33 GTR ones ?

Hi all,

I have a set of KYB model number 341287 front shockers that I am looking to replace my tired worn ones in my Series 2 4WD.

Problem is that when I took them out of the box and measured the length up against the originals, the KYB's were about 20-25mm longer.

Now this promts me to ask whether they are in fact R33 GTST or R33 GTR? the suppliers reassure me that they are for the R33 GTR according to KYB listing. I remember reading somewhere that the R33 GTST's are a bit longer.

I will also be fitting lowered Kings springs (R33 GTR) to work with the KYB shocks but am concerned about the shock travel characteristics with the lowered springs as they are already longer than original (springs 30mm-40mm lower + shocks are 20-25mm longer = 50-65mm less travel in shocks than they designed for). Will they bottom out?

Questions;-

1. Is the 341287 KYB the correct part number to use for the Stagea?

2. Also does anyone know of any alternatives readily available at a reasonable price?

Nissan Aust original are about $400/pair + 2 week wait Japan.

Bilstein's are about $590/pair (B46 2107 FR Bilstein Sport B6 R33GTR)

I got my Bilsteins (in NZ) for about half that by getting a set that had been traded in .The Bilstein trained guy reconditioned and valved them to suit my Stagea - you could try phoning around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
×
×
  • Create New...