1150cc Injectors

[Guest snotass]

SIX of the best Injectors on the market -NEW - Great for turbo performance - Don't get "sucked in " thinking Apexi etc are any better because there simply not and one will pay just too much just for the name. These injectors flow matched and tested and represent excellent value. 14mm into rail - Power flow or the likes make the rails to suit. Great up grade for 500 hp and over rb's - 2Jz etc.

Delphi Fuel Injectors

Delphi injectors are ball/seat design with 6 hole diffuser disc which gives quick response time and very efficient operation at high duty cycles which make them great for high horsepower street/strip applications. Rated @ 43.5PSI Fuel Pressure. The ECM dictates if you must run low or high impedance injectors. Stock 2.3 Turbos require low Impedance.

Performance advantages over pintle injectors ( Ford/Bosch/Accel/etc.) as listed by Delphi:

� The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.

� Compatible with alternative fuels (i.e. Methanol)

� Longer service life

� High-speed disc action allows wider dynamic flow range for improved idling

� Quieter operation

� Revolutionary disc design resists build up deposits which can affect fuel flow.

� No Fuel leakage for quicker starts

Static Flow Rate @ 43.5PSI Fuel Pressure Impedance Resistance Spray Angle Static Flow Rate @ 58.0PSI Fuel Pressure Approximate Horsepower

$750 ono - Have gone to Methanol and of course require almost double the flow.

Mandurah

[Gothik33]

hey mate

are they top feed/side feed??

Slav

[Guest snotass]

hey mate

are they top feed/side feed??

Slav

top

[dano4127]

High Impedance or Low Impedance?

[Guest snotass]

Low impedance - have been away sorry

[Guest snotass]

Need to sell - $550 - absolute give away!

[555kkk]

still got these ? and the rail