Jump to content
SAU Community

Recommended Posts

Yeah i know the bonnet needs to be cut or changed completely and then u'r gonna have problems with the front guards too - inark said the headlights were different for the R34 GTR as well, altho i haven't been able to compare the 2 up close and personal, they look the same from pics (GT-T and GTR lights that is)

Hey franks you wouldn't have anymore info about the BNR34 front bar fit to the ER by any chance? Cos if i get a R34 it's something i wanna do.

by replicating, do they mean possibly altering a few points, like the guard areas etc, to fit straight onto a ER34 - like there are GTR front bars for R33 available that just fit straight on?

cheers.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

yes eriktufa you are right... you need to change 3 of those thing together.... and if you change your front section to an GTR look then you will also need to change your real section too....

but than again with less then $2K for the whole lot is consider cheap... think aboutit how many thing you get

1. bonet

1 set front guard

1 set real guard

1. front bumper

1. real bumper

1 set of side skirt

1 real wing

...... all totall 9 Item... for that price... eriktufa how much it cost you for a set of GTT kit.

anyway i don't have the money tat y it does not work for me ..

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
    • Slap it and say it ain't going no where, you'll be fine.
    • So the whole rb25de neo setup was a tiptronic setup and i swapped everything over to my rb20de neo setup and yes even the cluster of the rb25 was swapped over. 
×
×
  • Create New...