Jump to content
SAU Community

Recommended Posts

Hi friendly people!

Was wondering what is needed to fit a set of Nismo 600cc injectors for RB26 into a RB25Neo engine.

Could you guys please list what parts are need for this injectors to be fitted?

thanks in advance!

Edited by lcy
Link to comment
https://www.sau.com.au/forums/topic/244610-fitting-rb26-injectors-in-rb25neo/
Share on other sites

Yeah NEO's are top feed. Same like GTR's injectors.

480cc are abit too small for my application.

Theres some one on the forum that has installed that 600cc nismo injctors into his rb25neo but hes a busy man.... still waiting for his reply.

So you reckon a new fuel rail and injector plug? Thats all? (resistor pack is not need if its top feed? am i correct?)

Err why don't you just go for the SARD units, they are a straight fit for the NEO - come in 650cc or 800cc

The RB26 injectors will not fit without a new rail and a whole heap of other small mods to adapt it to the RB25 NEO stuff...

The RB26 injectors will not fit without a new rail and a whole heap of other small mods to adapt it to the RB25 NEO stuff...

Yes i know theres sard 650cc injectors, but Mr tuner doesnt reccomend it.

When you say a whole heap of stuff. Do you know what is needed??DOnt just leave me hanging here. hahaha. Money isnt a problem and mr tuner is happy to do it for free. :D

basically, i just need everything ready before bringing the car in so theres no dramas later on.

cheers!

I'm keen on knowing why Mr Tuner does not recommend them... the are a tried and tested product.

When I mean a whole heap of other things, you'll need a new rail - the bolts don't 100% line up, the FPR location isn't ideal, and the overall fitment of the rail doesn't quite work. Been there done that, we were going to re-use the 650cc SARDs from my NEO in the RB2630 build we did, ended up ditching that idea after finding out the amount of work necessary. Ended up swapping the 650cc injectors for a set of SARD 800cc RB26 injectors that a mate had bought incorrectly.

Up to you though... if you got money to burn, everything is possible.

Oh also, unless you have an aftermarket computer capable of running high and low impedance injectors, you'll need that gay resistor pack modification :P Fortunately for me, my ECU caters for everything under the sun so it was a simple change of settings.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...