Jump to content
SAU Community

R32/a31/s13 Parts 4 Sale

nisskid
 Share

Recommended Posts

nisskid Grand Master

nisskid

Posted
Posted

I've got a fair bit of stuff i need to get rid of, dont need it any more and need $$ to feed my addiction.

R32 Subframe/Cradle - will fit S13/A31 etc etc. the bracket for the lower control arm is stuffed, can be fixed - $50

R32/A31/S13 Upper Control Arms - have Whiteline camber adjustable bushes in them - $150

HICAS Lock Bar - fits R32, locks toe at the rear and makes the rear end more predicable as well as saves weight - $70

R32/S13/A31 Rear Toe rods - fit non-hicas versions of the cars mentioned - $50

Aristo Stockies - 16x7.5/8.5, http://www.skylinesaustralia.com/forums/16...es-t244761.html - $300

RB20 dump pipe - standard dump pipe - $30

Link to comment
Share on other sites
nisskid Grand Master

nisskid

Posted
  • Author
Posted
Interested in the upper control arms.

How old are the whiteline bushes that are in them?

hey mate, they arent heaps old, think i bought them last year some time from SK, car has been on and off the road for defects and repairs, also didnt drive the thing for like 5 months because of a fractured foot, so hasnt seen heaps of wear.

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • HYBRID VL
      Who has a Infiniti Q60, Q50 (V37)?

      By HYBRID VL · Posted

      Looked at ConceptZ HKS exhaust i just find $1000 shipping sounds crazy. and that was USD so $4400+ after AUD conversion thats the exhaust and shipping. just seems crazy is there anyone else in Aus that sells any of these exhausts?what about these will they fit they say up to 2016 though mines a 2020 just wondering if they will fit?
    • HYBRID VL
      can someone with a Q50 or Q60 look at this and tell me what im missing please.

      By HYBRID VL · Posted

      Im thinking of getting some new wheels soon so i might keep a stock in the boot some how if i can fit and secure it. i will just buy a scissor jack from supercheap aswell. thanks guys. might even see if i can find a space saver just to get me out of shit.
    • DraftySquash
      Newbie from VIC

      By DraftySquash · Posted

      Oh also, looks like it will be 3-4 weeks before they arrive - so no coolant change until then 😕
    • DraftySquash
      Newbie from VIC

      By DraftySquash · Posted

      @soviet_merlin Managed to find my part and get it off Amayama. While I was at it and paying 9.75 AUD shipping for a $1 piece, I thought I may as well get some other plastic clips I broke 🙈  Thanks a lot for this link
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      The point of all that for me was to get to the PDM (yes, v37 is as fancy as a haltech) which is between the battery and the front inner guard.  In there, pins 80 and 81 on connector E125 are for hi beam according to the USDM manuals. I chose to intercept the high beam signal there as it is next to the battery and firewall so it is a good place to mount the fuse/relay for the LEDs. Unfortunately because you can't access the PDM with the battery in the car, it is difficult to test those wires are correct. The fuses for Left and Right high beam are marked on the PDM cover, so I checked continuity from the fuses to those pins with a multimeter, and it seems to be right. From here I need to splice a wire into one of those 2, and run it into the cabin for a switch, then run the trigger wire back to that general location for the relay. So, I removed the driver's side guard liner to check out where the wiring leaves the engine bay and enters the cabin.  Turns out, that does not happen behind in guard liner at all....waste of time, nothing is routed through there, so that was another 5 pin clips, 4 screws and a bolt of wasted effort All of the wiring is actually run across the separate compartment between the engine bay and the cabin under the cowling...so off with the windscreen wipers after all....
×
×
  • Create New...