Jump to content
SAU Community

Recommended Posts

Hey everyone,

I want to ask about if I got a ER34 Auto Turbo, I want to try to install a after market blow off is that possible? If I try to install it will the car get any problems? Beucase I heard one of my friend he tried to put a aftermarket one on his 32 GTST Auto....when he try to drive, it will easy to turn off the engine by itself.....So I want to confirm is that possible to change a after market one on my 34....if possible which modle and brand is suit for me....

Thanks everyone......

Link to comment
https://www.sau.com.au/forums/topic/244876-about-er34-turbo-auto/
Share on other sites

Firstly I won't ask why you want something that'll get you defected and won't add any kw's and probably screw up drivability on your auto 34. Instead, i'll give you the answers you want.

Yes it is possible to install an after market blow off valve (or GTR bov for that matter).

You may experience stalling at the lights on the auto 34.

You will probably need one that is 100% plumb back.

Hey everyone,

I want to ask about if I got a ER34 Auto Turbo, I want to try to install a after market blow off is that possible? If I try to install it will the car get any problems? Beucase I heard one of my friend he tried to put a aftermarket one on his 32 GTST Auto....when he try to drive, it will easy to turn off the engine by itself.....So I want to confirm is that possible to change a after market one on my 34....if possible which modle and brand is suit for me....

Thanks everyone......

My ER34 has the HKS SSQV and isnt plumb back, never had any problems at all.

LOL PTSHHH PTSHH BRO!!!

it doesnt matter whether its HKS or other.. amto BOV usually gets problems.. sometimes they don't.. cant hurt to try.. howeverit is defectable.. and won't improve anything.. can infact make fuel consumption bad, stalling, etc..

and i don't think you will get the noise in an auto as the sound is make when the clutch is released.. Correct me if im worng

LOL PTSHHH PTSHH BRO!!!

it doesnt matter whether its HKS or other.. amto BOV usually gets problems.. sometimes they don't.. cant hurt to try.. howeverit is defectable.. and won't improve anything.. can infact make fuel consumption bad, stalling, etc..

and i don't think you will get the noise in an auto as the sound is make when the clutch is released.. Correct me if im worng

OK i will correct you because you are wrong

every time the throttle is closed and there is enough pressure the BOV will open the clutch has nothing to do with it

an atmo BOV will work fine as long as you set it tight enough not to open at idle and at lower pressure

BOV = *fap* *fap* *fap* *fap* *fap*

Why do you want one? The noise it makes is an absolute giveaway to any cop, it's the most recognizable modification, and will do nothing but land you in hot water.

I still remember the day I ripped my BOV off - haven't looked back since :banana:

OK i will correct you because you are wrong

every time the throttle is closed and there is enough pressure the BOV will open the clutch has nothing to do with it

an atmo BOV will work fine as long as you set it tight enough not to open at idle and at lower pressure

Exactly. Which is to say, in an auto with your foot flat it won't blow off because the throttle doesn't close.

Take your foot of the throttle in either and it will happen. It's just that taking your foot off the throttle in a manual is typically associated with a gear change.

OK i will correct you because you are wrong

every time the throttle is closed and there is enough pressure the BOV will open the clutch has nothing to do with it

an atmo BOV will work fine as long as you set it tight enough not to open at idle and at lower pressure

Exactly. Which is to say, in an auto with your foot flat it won't blow off because the throttle doesn't close.

Take your foot of the throttle in either and it will happen. It's just that taking your foot off the throttle in a manual is typically associated with a gear change.

this is what i am meaning.. of course he could just put it in neutral.. or take his foot off the accelerator when in high revs.. but there's only one reason to do that.. LOOK AT MEEEE... OVER HERE GUYS :D LOOK WHAT I'M DOING *stall*... Oh shit.. don't look guys..

Edited by .:: GimpS-R34 ::.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...